Advertisement
WOODLAND
SCENICS
Please follow the River Pass General Instructions which are enclosed in this kit. You will be referred to the
drawings and notes printed here. Please read through all instructions before beginning to build your kit.
Chimney
Lightly sand bottom edge of chimney back (RP8-6) flat. Sand or file the smooth side of chimney back
and molded-in chimney front so back and front fit tight and flush with each other. Glue together. When
glue is dry, sand top of chimney flat.
RP8-1
®
RP8-4
(sand front edge)
Floyd's Barber Shop/
Binder Book Shop
RP8-6
(sand front second story edge)
RP8-5
#RP8
RP8-3
(sand both edges)
RP8-2
Advertisement
