Advertisement
WOODLAND
SCENICS
Please follow the River Pass General Instructions which are enclosed in this kit. You will be referred to the
drawings and notes printed here. Please read through all instructions before beginning to build your kit.
Chimneys
Lightly sand bottom of chimney (RP4-8) and glue to roof after roof installation.
Roof Overhang (optional)
Cut styrene roof material to about 4 1/4" x 1" for roof overhang (RP4-6). Cut or file two notches to clear
pilasters. Trim length to fit between pilasters as shown. Glue to wall above dock level loading doors. Place it
with a slight downward pitch and high enough for vehicles and rolling stock to clear.
RP4-4
(sand both edges)
®
RP4-8
(sand both edges)
RP4-6
roof overhang
#RP4
Dyden #3
RP4-2
cut notches in
roof overhang
Advertisement
