TechniSat DIGITRADIO 3 Operating Manual page 76

> Press the Play/Pause
In order to add tracks to the current programming sequence, press the Stop
button once. You can then place additional tracks in the next unoccupied
programme location.
In order to delete the programming when you are in programming mode,
press the Stop
programmed playback list, and to delete the programming, press the Stop
button 2x during playback.
Changing the source, or removing the CD, also deletes the programming.
Folders cannot be selected with an audio CD. The F+/F- buttons have no
function here.
10.9 Ejecting the CD
> Press the CD Eject button (Eject, 12) on the front of the device to eject the CD.
11 Playing music from a USB device
You can play audio files stored on a USB storage device on the DIGITRADIO 3.
To play from a USB data medium, this must be connected to the USB port
(15).
The device does not support the connection of USB media (hubs, etc.) via a
USB extension cable.
Not suitable for direct connection to PCs!
The device supports USB media of up to 2TB, formatted in the FAT16 or FAT32
file format. The maximum file size for a media file is 4GB.
Music files types .mp3, .wma, .wav, .aac, .ogg can be played back.
> Switch to USB mode by pressing the MODE button.
> [USB] is shown on the display.
Playback starts automatically with the first track in the first folder.
76
button to play the programmed tracks.
button and start again. In order to end playback of a