TechniSat DIGITRADIO 3 Operating Manual page 61

5 Description of the DIGITRADIO 3
5.1 Scope of supply
Before start-up, please check that everything has been delivered:
1 x DIGITRADIO 3
1 x telescopic antenna with installation tool
1 x remote control
1 x batteries for the remote control
1 x power supply unit
1 x instruction manual
5.2 Special features of the DIGITRADIO 3
The DIGITRADIO 3 is comprised of a DAB+/FM receiver with the following functions:
- You can store up to 20 DAB+ and 20 FM stations.
- The radio can receive the following frequencies: FM 87.5-108 MHz (analogue)
and DAB + 174.9-239.2 MHz (digital).
- The device has a time and date display.
- 4 direct selection buttons.
- CD player with MP3 playback.
- Music playback via Bluetooth connection.
- Music playback of music files from a USB memory stick.
- Charging function for external devices via a USB socket. For information on
this, please refer to Section 14.6.
5.3 Preparing the DIGITRADIO 3 for operation
Note: Operation of the DIGITRADIO 3 is described in this manual using the buttons on
the remote control. The DIGITRADIO can also be operated using the relevant buttons
on the device.
5.3.1 Inserting the batteries into the remote control
> Open the battery compartment on the back of the remote control by pushing
it in the direction of the arrow.
> Insert the batteries (2 x AAA 1.5 V) in accordance with the polarity indicated in
the battery compartment.
> Close the battery compartment lid carefully again to ensure that the lid
retaining tabs engage in the housing.
Promptly change a battery that is losing power.
Leaking batteries can cause damage to the remote control.
If the device is not to be used for a prolonged period, remove the battery from
the remote control.
DE
EN
FR
NL
61