Advertisement
5
Enter the setting.
Push the ENTER switch.
The setting is entered and the menu returns to item
select mode.
If you push the ENTER switch before pushing the
MENU switch, the setting returns to the value that
was previously set and then the menu returns to item
select mode.
6
Set other menu items.
List of Menu Items
Notes
• Some settings cannot be selected unless the previous
menu item is set to "ON."
No.
Page
01
FUNCTION
02
TALLY DIM
36
Using the Menu
Menu item
Settings
(default in
ASSIGN. 1
KNEE/PRST/
[MONO]
GRAY
ASSIGN. 2
KNEE/PRST/
MONO/
GRAY
KNEE
[OFF]
/ON
[OFF]
MONOCROME
/ON
[OFF]
GRAY SCALE
/ON
[0]
CHROMA
–
99 to
UP TALLY HIGH
1 to 50 to
[50]
UP TALLY LOW
1 to
Repeat steps 2 to 5 to set other menu items.
7
End menu operations.
Push the MENU switch repeatedly until the menu
page disappears from the display.
To restore a setting to its initial value
Move the c mark to the menu item to be restored, and then
push the ASSIGN 1 and ASSIGN 2 switches at the same
time while the ? mark is positioned to the left of the setting
(value setting mode).
• "– – –" appears to the left of settings that cannot be
selected.
Description
[ ]
)
Assigns a function to the ASSIGN 1 switch.
KNEE: Toggles the KNEE correction circuit ON or OFF
/MAG/
PRST: Toggles PRESET between ON and OFF. When
the switch is pushed down for 1 second or longer,
preset adjustment settings stored to "PRESET
SEL1" and "PRESET SEL 2" in the PRESET menu
alternates.
MONO: Toggles the display between color or
monochrome
MAG: Toggles the display between normal and
magnified. When the switch is pushed down for 1
second or longer, the section of the screen to be
magnified alternate.
GRAY: Toggles grayscales ON or OFF
Fine adjustments can be made for each function on the
various menu pages.
Assigns a function to the ASSIGN 2 switch. The
[MAG]
assignable functions are the same as those for ASSIGN 1
/
switch.
Turns the knee correction circuit ON or OFF.
Selects the color picture (OFF) or monochrome picture
(ON).
Shows (ON) or does not show (OFF) the grayscales at
left and right edges of the picture.
Adjusts the chroma level.
to 99
[100]
Adjusts the brightness of the tally indicator on the front of
the viewfinder when the TALLY switch is set to "HIGH."
Adjust this item after setting the TALLY switch to "HIGH"
and turning on the tally indicator.
Adjusts the brightness of the tally indicator on the front of
to 100
the viewfinder when the TALLY switch is set to "LOW."
Adjust this item after setting the TALLY switch to "LOW"
and turning on the tally indicator.
Advertisement
Chapters
