Advertisement
No.
Page
Menu item
03
INDICATOR DIM
IND MODE
G TALLY
R TALLY
BATTERY
04
INDICATOR DIM2
IND MODE
NON STANDARD
MAG
EXTEND
SAVE
05
MAGNIFICATION
MAGNIFICATION
POSITION
AUTO RELEASE
MAG PEAKING
PEAKING LEVEL
Settings
[ ]
(default in
)
[NOR]
/REV
[50]
1 to
to 100
[50]
1 to
to 100
[50]
1 to
to 100
[NOR]
/REV
[50]
1 to
to 100
[50]
1 to
to 100
[50]
1 to
to 100
[50]
1 to
to 100
[OFF]
/ON
[CNT]
1)
/UP L/UP R/
LOW R/ LOW L
[AUTO]
/MAN
[OFF]
/ON
[50]
0 to
to 100
Description
Adjusts the brightness and sets the lighting positions of
the indicators on the LCD screen.
NOR: Adjusts the brightness of indicators when the
viewfinder barrel is detached.
REV: Adjusts the brightness of indicators when the
viewfinder barrel is attached.
Adjusts the brightness of the green tally indicator. Adjust
this item after turning on the green tally indicator by
external control.
Adjusts the brightness of the TALLY/REC indicator. Adjust
this item after turning on the TALLY/REC indicator by
external control.
Adjusts the brightness of the BATT indicator.
Adjusts the brightness and sets the lighting positions of
the indicators on the LCD screen.
NOR: Adjusts the brightness of indicators when the
viewfinder barrel is detached.
REV: Adjusts the brightness of indicators when the
viewfinder barrel is attached.
Adjusts the brightness of the
Adjusts the brightness of the MAG indicator.
Adjusts the brightness of the spare indicator.
Adjusts the brightness of the SAVE indicator.
Selects the normal display (OFF) or magnified display
(ON). "OFF" (normal display) is selected whenever the
power is turned on.
Selects the section of the screen to be magnified.
CNT: Magnifies the center of the screen by 2.25 times
UP L: Magnifies the upper left of the screen by 2.25
times
UP R: Magnifies the upper right of the screen by 2.25
times
LOW R: Magnifies the bottom right of the screen by
2.25 times
LOW L: Magnifies the bottom left of the screen by 2.25
times
Specifies the manner in which the magnified display
returns to the normal display.
AUTO: After the magnified display appears by pushing
the ASSIGN 1 or ASSIGN 2 switch, the display
automatically returns to normal after a given amount
of time.
MAN: After the magnified display appears by pushing
the ASSIGN 1 or ASSIGN 2 switch, the display
returns to normal when the ASSIGN 1 or ASSIGN 2
switch is pushed again.
Specifies whether the peaking level menu setting is
applied whenever the magnification function is used.
OFF: The peaking level setting is not applied during
magnified display and normal display.
ON: The peaking level setting is applied during
magnified display and normal display.
Adjusts the peaking level that is applied during a
magnified display when "MAG PEAKING" is set to "ON."
indicator.
37
Using the Menu
Advertisement
Chapters
