Advertisement
No.
Page
06
PRESET
07
STATUS DISPLAY
08
DISPLAY MODE
1) If "ASSIGN. 1" or "ASSIGN. 2" in the FUNCTION menu is set to "MAG," the magnified section changes as follows when the respective
switch is held down during a magnified display.
CNT (
) t UP L (
38
Using the Menu
Menu item
Settings
(default in
[OFF]
PRESET
/ON
[1]
PRESET SEL
/2
[0]
PRST BRIGHT
–
99 to
PRST CONTRAST
[0]
–
99 to
PRST PEAKING
[0]
to 100
[0]
PRST CHROMA
–
99 to
[ON]
ASSIGN. 1
OFF/
[ON]
ASSIGN. 2
OFF/
[ON]
BRIGHT
OFF/
[ON]
CONTRAST
OFF/
[ON]
PEAKING
OFF/
[AUTO]
PANEL REV
[OFF]
PANEL REV<H>
/ON
[OFF]
PANEL REV<V>
/ON
[OFF]
CHAR REV<H>
/ON
[OFF]
V SHRINK
/ON
) t UP R (
) t LOW R (
Description
[ ]
)
Selects the setting made by the PEAKING, CONTRAST,
and BRIGHT controls on the front of the viewfinder and
the chroma level setting in the FUNCTION menu or by
"PRST BRIGHT," "PRST CONTRAST," "PRST PEAKING,"
and "PRST CHROMA" in the PRESET menu.
OFF: The setting of the PEAKING, CONTRAST, and
BRIGHT controls on the front of the viewfinder is
used.
ON: The setting made in the PRESET menu is used.
Select the preset adjustment settings while "PRESET" is
set to "ON."
1: Selects the settings stored to "PRESET SEL 1."
2: Selects the settings stored to "PRESET SEL 2."
Adjusts the picture brightness while "PRESET" is set to
to 99
"ON."
Adjusts the picture contrast while "PRESET" is set to
to 99
"ON."
Adjusts the peaking level while "PRESET" is set to "ON."
However, if the MAG PEAKING menu is set to "ON"
during a magnified display, the setting of the PEAKING
LEVEL menu is used.
Adjusts the chroma level while "PRESET" is set to "ON."
to 99
Specifies whether the status of the function stored to the
ASSIGN 1 switch is displayed (ON) or not (OFF).
Specifies whether the status of the function stored to the
ASSIGN 2 switch is displayed (ON) or not (OFF).
Specifies whether the status of the BRIGHT control on
the front of the viewfinder is displayed (ON) or not (OFF).
Specifies whether the status of the CONTRAST control
on the front of the viewfinder is displayed (ON) or not
(OFF).
Specifies whether the status of the PEAKING control on
the front of the viewfinder is displayed (ON) or not (OFF).
Specifies the manner in which the picture and characters
/MAN
in the LCD screen are flipped vertically.
AUTO: The picture and characters automatically flip
when the viewfinder barrel is detached.
MAN: The picture flips according to the settings of the
DISPLAY MODE menu.
Specifies whether the picture is flipped horizontally (ON)
or not (OFF) while "PANEL REV" is set to "MAN."
Specifies whether the picture is flipped vertically (ON) or
not (OFF) while "PANEL REV" is set to "MAN."
Specifies whether the characters are flipped horizontally
(ON) or not (OFF) while "PANEL REV" is set to "MAN."
Specifies whether the picture and characters are scaled
down in vertical direction (ON) or not (OFF) for use with
the anamorphic converter lens.
) t LOW L (
)
Advertisement
Chapters
