Advertisement
Detaching the Eyepiece
Detaching the eyepiece gives you a clear view of the
screen even with your eye away from the viewfinder.
Also, detach the eyepiece to clean it.
For details on cleaning, see "Cleaning the Screen or
Interior" on page 34.
1
Turn the eyepiece locking ring fully counterclockwise
to line up the red alignment mark on the eyepiece
locking ring with the red alignment mark on the
viewfinder barrel.
Eyepiece locking ring
Alignment mark on the eyepiece
locking ring
Alignment mark on the
viewfinder barrel
2
Detach the eyepiece.
Alignment mark on the end of eyepiece
Note
Take care not to scratch the eyepiece surface on the LCD
side.
Do not scratch this surface.
To refit the eyepiece
1
Align the alignment mark on the eyepiece locking
ring with that on the viewfinder barrel.
2
Align the alignment mark on the end of eyepiece with
that of the eyepiece locking ring, then insert the
eyepiece into the viewfinder barrel until the eyepiece
snaps into place.
3
Turn the eyepiece locking ring fully clockwise until
the arrow of the "LOCK" indication points to the
alignment mark on the viewfinder barrel.
Note
Do not use any other lenses except the supplied (built
in) lens assembly. Other lenses may focus sunlight on the
LCD, resulting in damage to the LCD.
31
Detaching the Eyepiece
Advertisement
Chapters
