List Of Menu Items - Sony DXF-C50WA Operating Instructions Manual

List of Menu Items

Notes
• Some settings cannot be selected unless the previous
menu item is set to "ON."
Page Menu
01 FUNCTION
02 TALLY/IND
38
Using the Menu
Item Settings
(default in [
ASSIGN. 1 KNEE/PRST/
[MONO]/MAG/
UPTLY/PEAK+/
GUIDE/WFM
ASSIGN. 2 KNEE/PRST/
MONO/[MAG]/
UPTLY/PEAK+/
GUIDE/WFM
[OFF]/ON
KNEE
MONOCHROME [OFF]/ON
CHROMA –99 to [0] to 99
PEAKING PLUS [MODE1]/MODE2 For selecting the operation mode upon pressing the
SW
UP TALLY OFF/[ON]
1 to [5] to 10
UP TALLY DIM
TALLY/IND OFF/[ON]
TALLY/IND DIM 1 to [5] to 10
• "– – –" appears to the left of settings that cannot be
selected.
Function
])
For assigning a function to the ASSIGN. 1 switch.
Detailed settings of the individual features can be specified
on the respective menu pages.
KNEE: Toggles the KNEE correction circuit between ON
and OFF
PRST: Toggles PRESET between ON and OFF (see
PRESET menu on the page 42)
MONO: Toggles the black-and-white display between ON
and OFF
MAG: Toggles the magnification function between ON
and OFF (Press and hold for one second or more to
select the area to magnify)
UPTLY: Toggles UP TALLY between ON and OFF
PEAK+: Toggles the peaking mode between STD and
PLUS (Press and hold for one second or more to
execute COLOR DETECT)
GUIDE: Toggles GUIDE FRAME between ON and OFF
WFM: Toggles WAVEFORM between ON and OFF
For assigning a function to the ASSIGN. 2 switch.
The assignable functions are the same as those for
ASSIGN. 1.
For turning the KNEE correction circuit ON or OFF.
For selecting color display (OFF) or black-and-white display
(ON).
For setting the chroma level.
Lowering the value decreases the chroma level.
ASSIGN. switch that is assigned the PEAKING PLUS
function.
MODE1: Toggles the PEAKING MODE STD h PLUS
MODE2: Toggles in the sequence of STD t COLOR t
AREA t BOTH t STD
For controlling the up-tally lamp.
ON: Enables up-tally lamp
OFF: Disables up-tally lamp (Does not light up even
when the camera receives red tally signals)
For setting the brightness of the up-tally lamp.
Raising the value increases the brightness; lowering the
value decreases the brightness.
For activating all tally lamps and indicators (ON) or
activating only the BATT indicator (OFF).
For setting the brightness of the tally lamps and indicators.
Raising the value increases the brightness; lowering the
value decreases the brightness.