Advertisement
Magnifying the Picture
To facilitate focus adjustments, you can magnify the
picture by 2.25 times vertically and horizontally.
To magnify the picture, push the ASSIGN 1 switch (at its
factory-setting) or the ASSIGN switch with which the
magnifying function is assigned by the menu operation
(page 35). Each push on the switch toggles between
magnified and normal display.
To select the magnified section
The magnified section can be selected from among the
upper left, upper right, lower right, lower left, and center
(factory-setting) of the picture.
Upper left
Center
Lower left
1
Keep the ASSIGN 1 or ASSIGN 2 switch pushed
down for about a second or longer.
The MAG indicator at the lower part of the LCD
screen lights up. At the same time, the LCD screen
changes to magnified screen.
2
Keep the ASSIGN 1 or ASSIGN 2 switch pushed
down, and release it when the screen shows the
magnified picture of the desired section.
While the switch is pushed down, the magnified
picture is maintained and the selection changes about
once every second between upper left, upper right,
lower right, lower left, and center, in that order. The
actually magnified section changes at the same time.
The magnified section selection can also be made
with "POSITION" in the MAGNIFICATION menu
(page 37).
To return to the normal display
Push the ASSIGN 1 or ASSIGN 2 switch.
The MAG indicator at the lower part of the LCD screen
turns off and the LCD screen returns to normal display.
When "AUTO RELEASE" in the MAGNIFICATION
menu (page 37) is set to "AUTO," the LCD screen
automatically
returns to normal display after about five
seconds after the
pushed.
Upper right
Lower right
ASSIGN 1 or ASSIGN 2 switch is
Magnifying the Picture
33
Advertisement
Chapters
