Table of Contents
Advertisement
Install
Breakers are field installable and no additional tools are required.
1:
Position the breaker with the handle pointed towards you and the wire termination points facing
the outside wall of the panel.
2:
Hook the outer corner of the breaker under the breaker clip located on the outside edge of the
interior breaker panel.
3:
Pivot the breaker into place, pushing firmly to ensure it is seated completely.
4:
Test installation by pulling firmly on the outer edge of the breaker. When installed correctly, the
breaker should not easily release without the use of tools (such as a screwdriver).
Main Breakers
For information on Sensor IQ Main Breaker options, see the
documentation is available for free download at etcconnect.com.
Breakers
Main Breaker Installation Guide
Insert
screwdriver and
pry outward to
release the
breaker from
the interior
. All ETC
39
Advertisement
Table of Contents
