Table of Contents
Advertisement
Chapter 1
Prepare to Install
Inspect the Shipment
Before you begin installation, check your shipment and confirm that it arrived complete and
undamaged.
1:
Check the shipping container for physical damage.
• If you find damage, document it to help with a claim against the shipper.
2:
Inspect the order for completeness.
• Check the box contents received against the packing list to ensure that your order is received
complete.
• If you discover a problem with the contents of the shipment, contact ETC Systems Group.
Help from Technical Services
See
Unpack the Panel
For best results, follow these instructions when unpacking the panel from the box.
1:
Lay the box flat, top side up on a floor or flat horizontal surface. The top side of the box is labeled
for your convenience.
2:
Lift and remove the box lid. A standard model Sensor IQ Breaker Panel ships from the factory pre-
wired with low-voltage control. As you remove the panel from the shipping carton, confirm that
the following items are included:
• A door, packaged separately. Check that the door is the correct model as ordered.
• The Sensor IQ panel with interiors.
• The quantity and type of breakers ordered.
Note:
Note:
3:
To lift the panel from the packaging, one person lifts from the top side of the enclosure, indicated
with an arrow on the panel interior, while another person lifts from the bottom side of the panel.
4:
Rest the panel on a floor or flat horizontal surface until the installation personnel are ready to
begin the installation procedure.
Installation Environment
For proper operation of the Sensor IQ Breaker Panel, ensure that the intended installation location
conforms to the following environmental and electrical requirements.
• Dry room (5%–95% humidity, non-condensing), 32°F–104°F (0°C–40°C) ambient temperature,
dust free.
• All Sensor IQ models can be surface-mounted.
12
All accessory options and option cards are packaged separately.
It is recommended to perform the next step with a minimum of two people as the
panel may be awkward and heavy to remove from the packaging.
page 11
on
.
Sensor IQ Installation Manual
Advertisement
Table of Contents
