Procedure Steps
1
Take a serial cable (CKN6324).
Connect the KVL to the serial modem through the KVL DB9 (RS-232) Port.
2
Figure 1-14 KVL and Serial Modem – Connected (Example)
Since the KVL 4000 has no flow control, you need to configure any attached external modem to:
1.4.4.3.4 Connecting the KVL to the Network for the KMF Communication
Prerequisites:
Ensure that you have:
• USB to Ethernet Adapter
• MINI-B to Type-A USB Cable
• Ethernet cable
Procedure Steps
6871018P37-F - January 2013
• Override the modem's Data Terminal Ready signal.
• Turn off the echo of offline commands.
1.4.4.3.4 Connecting the KVL to the Network for the KMF Communication
1-19