Procedure Steps
1
On the KVL main screen, select Settings → KMF → KMF port.
Step result: A decimal keypad appears.
2
Enter the port number for the Main KMF.
The available range is 49156 through 65535.
If you change the default value, ensure it matches the port number configured on the KMF.
Select the Backup tab and enter the port number for the Backup KMF.
3
4
Tap Done.
Step result: The KMF ports are set.
5
Tap Done on the consecutive screens to return to the KVL main screen.
7.1.5 Entering Main and Backup KMF IP Addresses
For the KVL to connect with the KMF through the Network, you need to configure the KMF IP address on the KVL.
Prerequisites:
Only an Administrator can enter Main and Backup KMF IP addresses.
Obtain the IP address from your radio network administrator.
The IP address have to be IPv4.
6871018P37-F - January 2013
7.1.5 Entering Main and Backup KMF IP Addresses
7-7