Kvl 4000 Disaster Recovery; Troubleshooting Kvl Application And/Or Vpn Software Failure; Table 12-3 Kvl 4000 Disaster Recovery - Motorola KVL 4000 User Manual

KVL 4000 Key Variable Loader ASTRO 25 User Guide
Procedure Steps
1 On the Today screen, select
Select Settings → System → USBConfig.
2
3 Perform one of the following actions:
• If there are two options available (USB Host and USB Client), then select USB Host if you need to
connect the PDA to the Security Adapter, or select USB Client if you need to connect the PDA to a PC.
• If there are three options available (USB Host, USB Client, and USB OTG), then select USB OTG to
allow the KVL to auto detect whether it is connected to the Security Adapter or a PC.

12.5 KVL 4000 Disaster Recovery

Table 12-3 KVL 4000 Disaster Recovery

Event
Hardware failure
KVL application failure
12.6 Troubleshooting KVL Application and/or VPN
Software Failure
If you are experiencing problems with the KVL and/or NCP applications, follow "Running the KVL Software Installation
Wizard" in the KVL 4000 FLASHPort Upgrade User Guide to reinstall the applications.
12-6
.
Remedy
Replace the device and reenter all the lost data. Refer to this manual to
configure your KVL with all the necessary parameters.
Keep non-sensitive data in a secure location so that you can
restore it quickly when needed.
Reinstall the KVL application. See "Running the KVL Software
Installation Wizard" in the KVL 4000 FLASHPort Upgrade User Guide.
6871018P37-F - January 2013