Changing The Target's Mnp - Motorola KVL 4000 User Manual

Procedure Steps
1 Select Configure a radio on the KVL main screen.
Step result: You are prompted to connect a target device.
If the device is already connected, this prompt is skipped. If a device becomes disconnected, you
are returned to the prompt.
Connect the target device. (See
2
Step result: A connected tone is played and a list of available options appears.
Select RSIs.
3
Step result: A list of RSI values appears.
4 To change the target device's RSI or KMF RSI, continue to
page 7-22.

7.4.3 Changing the Target's MNP

Prerequisites:
Ensure you have:
• an appropriate key load cable
• an adaptor (if required)
6871018P37-F - January 2013
1.4.4.1 Connecting the KVL to a Radio or Another Target Device, page
• If a value is being actively updated, the list item says [updating...] instead of presenting
the value.
• The Group RSI list item is read-only.

7.4.3 Changing the Target's MNP

7.4.4 Changing the Target's RSI and KMF RSI,
1-13.)
7-21