Provisioning A Radio For Remote Control Head Key Loading - Motorola KVL 4000 User Manual

Procedure Steps
1 On the KVL main screen, select Settings → KVL RSI.
Step result: A decimal keypad appears.
2 Enter the RSI using the decimal keypad.
3 When you have entered the RSI, tap Done on the consecutive screens to return to the KVL main screen.
8.3 Provisioning a Radio for Remote Control Head
Key Loading
In order to be able to perform operations through a Remote Control Head, provision a radio with keys for the
available algorithms.
Prerequisites:
Ensure you have:
• an appropriate key load cable
• an adaptor (if required)
Procedure Steps
1 Select Configure a radio on the KVL main screen.
Step result: You are prompted to connect a radio.
If the device is already connected, this prompt is skipped. If the device becomes disconnected, you
are returned to the prompt.
2 Connect the radio. (See
Step result: A connected tone is played and a list of available options appears.
6871018P37-F - January 2013
• The available values range from 1 through 9999999. The default value is 9999998.
• As you enter the digits they appear in the info field. If you have entered a 7-digit value, the
keypad becomes disabled.
• To delete a digit you have entered, tap the < Del key, or hold it to delete all entered digits.
To abort the operation, tap Cancel.
1.4.4.1 Connecting the KVL to a Radio or Another Target Device, page

8.3 Provisioning a Radio for Remote Control Head Key Loading

1-13.)
8-5