Motorola KVL 4000 User Manual page 135

4 Connect the target device to the KVL using an appropriate key load cable. (See
to a Radio or Another Target Device, page
Step result: A tone is played to indicate the start of the loading process and a progress animation appears,
indicating the current group and the total number of groups being loaded. Smart bar indicates the current
group being loaded through blinking indication. When the loading process is completed, a completed tone is
played and a confirmation screen appears.
The following are the possible states indicated on the list of key groups:
Disconnect the target device.
5
6 Connect another target device to load all key groups to (the loading process starts automatically), or tap Done
on the consecutive screens to return to the KVL main screen.
6871018P37-F - January 2013
• Check mark – the key group has been loaded.
• Animation – the key group is currently being loaded.
• Selection – the key group is waiting to be loaded.
1-13.)
4.4 Loading All Key Groups
1.4.4.1 Connecting the KVL
4-9