1.4.8.2 Configuring VPN Settings - KVL Connected to the Firewall
Through a Network
Prerequisites:
• Obtain the VPN gateway IP address from the system administrator.
• For Windows XP, ensure that Microsoft ActiveSync is installed on your PC.
• For Windows Vista and Windows 7, ensure that Microsoft Windows Mobile Device Center is installed
on your PC.
• Ensure that NCP Entry Configuration Manager WM is installed on your PC. NCP Entry Configuration
Manager WM is available at http://www.ncp-e.com/en/downloads/software.html.
• Ensure that you have the USB Programming Cable.
When and where to use:
If you are going to establish the KVL to KMF Ethernet connection using the VPN client provided by Motorola, use
these steps to create a configuration profile for a scenario when the KVL is going to be connected to the Firewall
through a network.
Procedure Steps
1
On the desktop, select Start → Programs → NCP Secure Client → NCP Entry Configuration Manager
WM.
Step result: The NCP Entry Configuration Manager WM launches.
Figure 1-32 NCP Entry Configuration Manager WM Window
6871018P37-F - January 2013
1.4.8.2 Configuring VPN Settings - KVL Connected to the Firewall Through a Network
1-35