Assembling The Security Adapter; Figure 12-5 Removing Pcb Assembly; Figure 12-6 Removing Usb Clip And Foam Pad - Motorola KVL 4000 User Manual

3 Remove the connectors from the front housing connector holes, disconnect the 30-pins board-to-board
connector from the flex to the PCB, and remove the PCB assembly from the front housing.

Figure 12-5 Removing PCB Assembly

4 Remove the USB clip from the USB connector and the foam pad from the DB-9 connector on the PCB assembly.

Figure 12-6 Removing USB Clip and Foam Pad

12.8 Assembling the Security Adapter

Procedure Steps
6871018P37-F - January 2013

12.8 Assembling the Security Adapter

12-9