Invacare Rea Spirea 4 NG User Manual page 35

Fastening the 3-point passenger restraint system
IMPORTANT!
The illustration above may differ depending on
the restraint system supplier.
WARNING!
– Ensure the 3-point passenger restraint system
fits as tightly across the user's body as possible
without discomfort and no part is twisted.
– Ensure the 3-point passenger restraint system is
not held away from the user's body by parts of
the wheelchair such as armrests or wheels etc.
– Ensure the user restraint has a clear path
from the user to the anchor point without
interference by any part of the vehicle,
wheelchair, seating or accessory.
– Ensure the lap belt fits snugly over the
occupant's pelvis and is not allowed to ride up
into the abdominal area.
– Ensure the user is able to reach the release
mechanism unaided.
1536533-F
1. Attach the 3-point passenger restraint system referring
to the user manual supplied with your 3-point restraint
system.
IMPORTANT!
– Apply the posture belt of the 3-point passenger
restraint system low across the pelvis so
that the angle of the posture belt is within
the preferred zone (A) of 30° to 75° to the
horizontal. A steeper angle is preferred, but
never exceeding 75°.
A
Transport
35