Disinfection - Invacare Rea Spirea 4 NG User Manual

Rea® Spirea® 4 NG
3. Spray the wheelchair chassis with detergent, for example
a car-cleaning agent with wax, and leave on to work.
4. Rinse the wheelchair chassis with a high-pressure
cleaning or ordinary jet of water depending on how dirty
the wheelchair is. Do not aim the jet towards bearings
and draining holes. If the wheelchair chassis is washed
in a machine the water must not be hotter than 60º C.
Only use water and soft soap to clean the table.
5. Leave the wheelchair to dry in a drying cabinet. Remove
parts where water has collected for example in end
tubes, ferrules etc. If the wheelchair has been washed
in a machine, blow-drying with compressed air is
recommended.
Polyurethane-coated fabric
Lighter stains on the fabric may be neutralized with a soft
damp cloth and some neutral detergent. To neutralize
larger, more persistent stains, wipe the fabric with alcohol
or turpentine substitutes, and wash with hot water and a
neutral detergent.
38
The fabric can be washed at temperatures up to 60º C.
Normal detergents can be used.
All parts of the wheelchair with polyurethane-coated
fabric upholstery, such as armrest pads, calf pads,
headrest or neckrest, should be cleaned according
to the instruction above.

8.3.6 Disinfection

The wheelchair may be disinfected by spraying or wiping
with tested, approved disinfectants.
Spray a soft cleaning and disinfecting product
(bactericidal and fungicide meeting the EN1040
/ EN1276 / EN1650 standards) and follow the
instructions given by the manufacturer.
1. Wipe down all generally accessible surfaces with a soft
cloth and ordinary household disinfectant.
2. Allow the product to air-dry.
1536533-F