Labels And Symbols On The Product; Identification Label; Other Labels - Invacare SB 910 User Manual

Hospital bed
Table of Contents

Advertisement

WARNING!
Risk of malfunction due to electromagnetic
interference
Do not use this bed adjacent to or stacked with
other electrical equipment, than specified in the
following, as it could result in improper operation.
If such use is necessary, the bed and the other
equipment must be closely observed to verify
that they are operating normally.
This bed can be used together with Invacare
approved accessories and medical electrical
equipment connected to the heart (intracardially)
or blood vessels (intravascularly) provided that
following points are respected:
– Medical electrical equipment should not be
fixed on the bed's metallic accessories such as
side rails, lifting pole, drip rod, bed ends, etc.
– The medical electrical equipment power supply
cord should be kept clear of the accessories or
any other moving parts of the bed.

2.4 Labels and symbols on the product

2.4.1 Identification Label

The identification label is placed on the frame of the bed and
contains the main product information, including technical
data.
Serial number
Reference number
Manufacturer
Date of manufacture
Medical device
Max. user weight
Max. safe working load
CLASS I equipment
Type B applied part
1568774-H
WEEE conform
European Conformity
Abbreviations for technical data:
Iin = Incoming Current
Uin = Incoming Voltage
Int. = Intermittence
For more information about technical data, refer to 9
Technical Data, page 22.

2.4.2 Other Labels

Read the user manual before using this product and follow
all instructions for safety and use.
Definition of min. weight, min. height and
min. body mass index of an adult user.
See 3.1 Intended use, page 8 .
Refer to user documentation for the
correct mattress measures.
See 9 Technical Data, page 22.
XXX
hPa
Total weight of the product with the
maximum safe working load applied
Temperature limit
Humidity limitation
Atmospheric pressure limitation
Transport and storage conditions
Operation conditions
Safety
AC = Alternating Current
Max = maximum
min = minutes
XXX hPa
=
XXX kg
7

Advertisement

Table of Contents
loading

Table of Contents