Service - Invacare SB 910 User Manual

Invacare® SB® 910

6.3 Service

IMPORTANT!
– The mattress support must be supported during service inspections, to prevent accidental lowering.
– Only personnel who have received the necessary instructions or training may perform service and maintenance
of the bed.
– After reconditioning the bed, or if bed functions change, service must be carried out according to the service
checkpoints and intervals.
A service contract can be made in the countries, where Invacare has its own sales company. In certain countries Invacare offers
courses in service and maintenance of the bed. Spare parts lists and additional user manuals are available from Invacare.
Service checkpoints
Checkpoints
Joints 1
2
3
Castors 4
5
Moving parts 6
7
8
9
10 Leg section positioning
11
Electrical system 12 Wires
13 Electrical parts/plugs
14 All motors
Accessories 15 Accessories
16
Surface 17 Damaged coating
Motors, hand control and control units are serviced by exchanging the faulty part.
Service intervals
Before use After 3 months
1
2
3
4
5
18
Check
Circlips, starlock
washers and pipe Locked and intact.
pins.
Screws and bolts Tightened.
Weldings Intact; no visible cracks.
Castor fittings and
Screws tightened.
brake pedals.
Castor brakes Brakes locking properly.
Lock/release function working
Neck rest function
properly.
Sections moving correctly;
Height positioning
motor running properly.
Sections moving correctly;
Backrest positioning
motor running properly.
Sections moving correctly;
Thigh positioning
motor running properly.
Sections moving correctly;
motor running properly.
Trendelenburg Sections moving correctly;
positioning motor running properly.
Correctly wired; placed in
channels; undamaged.
Enclosures undamaged.
Suspensions intact.
Correctly assembled; correct
function.
Side rail locking and Locking properly; running
moving system. Bars smoothly. Bars and laths
and laths. straight.
No cracks/lost paint.
Year 1–8
Every 6
months
X
X
Comments
Make sure the motor pipe pin
braces are locked.
Removed lock nuts have to be
replaced by new ones.
Pay extra attention to the
brake pedals.
Try by pushing the beds with
brakes locked
Run up-down/in-out to outer
positions
Run up-down/in-out to outer
positions
Run up-down/in-out to outer
positions
Run up-down/in-out to outer
positions
Run up-down/in-out to outer
positions
Repair with touch-up paint
Year 1–8 Year 1–8
Every 12 Every 24
months months
X
X
X
X
X
Time
duration
(min)
2
5
7
1
2
1
2
1
1
1
1
2
3
3
5
5
3
Year 9 Year 10
Every 12 Every 12
months months
X X
X X
X X
X X
X X
1568774-H