Labels And Symbols On The Product; Product Label; Other Labels And Symbols - Invacare Soft Tilt User Manual

Invacare® Soft Tilt
Electromagnetic interference
WARNING!
Risk of malfunction due to electromagnetic
interference
Electromagnetic interference between this product
and other electrical equipment can occur and
disturb the electrical adjustment functions of this
product. To prevent, reduce or eliminate such
electromagnetic interference:
– Only use original cables, accessories and spare
parts, to not increase electromagnetic emission
or reduce electromagnetic immunity of this
product.
– Do not use portable radio frequency (RF)
communications equipment closer than 30 cm to
any part of this product (including cables).
– Do not use this product near active high-frequency
surgical equipment and the RF shielded room of
a system for magnetic resonance imaging, where
the intensity of electromagnetic disturbances is
high.
– If disturbances occur, increase the distance
between this product and the other equipment
or switch it off.
– Refer to the detailed information and follow
the guidance in chapter 10 Electromagnetic
compatibility (EMC), page 23.

2.2 Labels and symbols on the product

2.2.1 Product label

The product label is placed on the main module of the Soft Tilt
and contains the main product information, including technical
data.
6
Symbol
SN Serial Number
Reference Number
REF
Manufacturer Address
Manufacturing Date
Max. User Weight
Max. Safe Working Load
Type B Applied Part
WEEE conform
European conformity
Medical device
MD
Insulation Class 2
Recyclable battery
Abbreviations for technical data:
• Iin = Incoming Current
• Uin = Incoming Voltage
• Int. = Intermittence
For more information about technical data, refer to 9 Technical
Data, page 21.

2.2.2 Other labels and symbols

Read carefully the user manual before using
this product and follow all instructions for
safety and use.
Indicates the correct placement and orientation
of the Soft Tilt® main module on the bed.
Mounting the Soft Tilt (Mounting the
See 3.3
main module), page 7.
Indicates the correct placement of the head
and foot arms to the main module.
Mounting the Soft Tilt (Mounting the
See 3.3
arms and cover), page 9.
Indicates the correct placement of the cover on
the Soft Tilt®.
Mounting the Soft Tilt (Mounting the
See 3.3
arms and cover), page 9.
• AC = Alternating Current
• Max = maximum
• min = minutes
IVCNORBE221119