Section 7: Illustrated Parts List; Parts Ordering Procedure - Vanair ALL-IN-ONE POWER SYSTEM AIR N ARC 150 Series Operations Manual & Parts List

Welder, generator, air compressor, battery booster

Table of Contents

AIR N ARC

150 SERIES

ILLUSTRATED PARTS LIST

7.1 PARTS ORDERING

PROCEDURE

Part orders should be placed through the dis-

tributor from whom the unit was purchased. If,

for any reason parts cannot be obtained in this

manner, contact the factory directly at the

address or phone numbers listed to the right.

When ordering parts, always indicate the

Serial Number of the machine package. This

can be obtained from the Bill of Lading for the

machine package, or from the compressor unit

serial number plate. See Figure 7-1 for loca-

tion of machine package serial plate. Consult

Table 7A: Recommended Spare Parts List

on the next page for a listing of replacement

parts.

VANAIR MANUFACTURING, INC.

(800) 526-8817 • www.vanair.com

SECTION 7:

Figure 7-1: Machine Package Serial Number Plate Location

090043-OP_r0 (MARCH - 2015)