Page 1 Phone: (219) 879-5100 components before operation. Manufacturing, Inc., before (800) 526-8817 Substituting non-Vanguard™ beginning any changes to the Oil or non-genuine Vanair filter Air N Arc system. Service (844) VANSERV components WILL VOID THE COMPRESSOR WARRANTY! [844-826-7378] Service Fax: (219) 879-5335...
Page 2 TO THE GREAT EXTENT PERMITTED BY APPLICABLE LAW, THE REMEDIES PROVIDED HEREIN ARE THE SOLE AND EXCLUSIVE Vanair must be noti ed in writing within thirty (30) days of any REMEDIES APPLICABLE TO THE VANAIR EQUIPMENT. IN NO such defect or failure. No warranty work or returns without prior EVENT SHALL VANAIR BECOME LIABLE FOR DIRECT, INDIRECT, authorization is allowed.
Page 3: Table Of Contents
ENGINE EXHAUST GASES CAN KILL ......................6 1.5.6 ENCLOSED SPACES CAN CAUSE A BUILD-UP OF NOXIOUS FUMES AND OVERHEATING...... 6 1.5.7 BATTERY ACID CAN BURN SKIN AND EYES ....................6 Continued on next page... Vanair Manufacturing, Inc. PAGE - I 090043-OP_r0 (MARCH-2015) vanair.com • 800-526-8817...
Page 4 SECTION 3: INSTALLATION ..........13 MACHINE PACKAGE RECEIPT/INSPECTION ................13 MACHINE PACKAGE PREP ......................13 SERVICE BODY PREP ......................... 14 STABILIZING PRECAUTIONS FOR MACHINE MOUNTING ............14 Continued on next page... Vanair Manufacturing, Inc. PAGE - II 090043-OP_r0 (MARCH-2015) vanair.com • 800-526-8817...
Page 5 ADJUSTING COMPRESSOR CUT-IN / CUT-OUT PRESSURE ................ 35 5.5.2 ADJUSTING THE ENGINE SPEED ........................36 5.5.3 REPLACING AND RE-TENSIONING THE COMPRESSOR AND/OR GENERATOR DRIVE BELTS ....36 Continued on next page... Vanair Manufacturing, Inc. PAGE - III 090043-OP_r0 (MARCH-2015) vanair.com • 800-526-8817...
Page 6 7.2B ANA 150 SYSTEMS ASSEMBLIES (30 GALLON, STAND ALONE, WELD ONLY, 12V AND 12/24V BATTERY BOOST) ................... 60 7.2C ANA 150 SYSTEMS ASSEMBLIES (STAND ALONE, SKID MOUNT, 12V AND 12/24V BATTERY BOOST) ......................62 Continued on next page... Vanair Manufacturing, Inc. PAGE - IV 090043-OP_r0 (MARCH-2015) vanair.com • 800-526-8817...
Page 7 7.15A INSTALLATION AND DIMENSIONS - 8 GALLON TANK .............122 7.15B INSTALLATION AND DIMENSIONS - 30 GALLON TANK ............123 7.15C INSTALLATION AND DIMENSIONS - SKID MOUNT..............124 7.16 HOSE INSTALLATION GUIDE ......................125 Vanair Manufacturing, Inc. PAGE - V 090043-OP_r0 (MARCH-2015) vanair.com • 800-526-8817...
Page 8 ® TABLE OF CONTENTS AIR N ARC 150 SERIES BLANK PAGE Vanair Manufacturing, Inc. PAGE - VI 090043-OP_r0 (MARCH-2015) vanair.com • 800-526-8817...
Page 9: Warranty
1. Locate the machine’s serial number: Authorization) number that will provide The machine package serial number plate is for the return of the item to Vanair for located inside the machine compartment on analysis and a final determination as to the floor next to the generator mounting the item’s warranty status.
Page 10 ENGINE SERIAL PLATE / SERIAL NUMBER LOCATION Figure W-1: Machine Serial Number Location Disposition of Goods, Notifications and Vanair will issue credit to the customer. All Additional Notes, will be required. parts eligible for warranty must have the RMA number on the invoice at the time of Customers have 30 days after the RMA purchase.
Page 11: Section 1: Safety
Identifies actions or conditions which can cause fatal shocks or may cause death, severe injury, severe burns. The electrode equipment damage or destructive work circuit malfunctions. electrically live whenever the VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 1 (800) 526-8817 • www.vanair.com...
Page 12: Fumes And Gases Can Be Hazardous
If inside, ventilate the area and/or use local check connections. forced ventilation at the arc to remove welding fumes and gases. Frequently inspect input power cord for damage or bare wiring and replace cord VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 2 (800) 526-8817 • www.vanair.com...
Page 13: Build Up Of Gas Can Injure Or Kill
Do not weld where flying sparks can strike exhaust gases can build up flammable material. and machine can overheat, Protect yourself and others from flying causing fire. sparks and hot metal. VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 3 (800) 526-8817 • www.vanair.com...
Page 14: Flying Metal Can Injure Eyes
Protect compressed Wear approved safety cylinders from excessive glasses with side shields even under your heat, mechanical shocks, welding helmet. physical damage, slag, open flames, sparks, and arcs. VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 4 (800) 526-8817 • www.vanair.com...
Page 15: Engine Hazards
Reinstall doors, panels, covers, or guards working on a battery. when servicing is finished and before starting engine. Do not use weld mode to charge batteries or jump start vehicles. VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 5 (800) 526-8817 • www.vanair.com...
Page 16: Hot Parts Can Cause Severe Burns
Do not use in enclosed spaces where deadly Do not tip battery. exhaust gases can build up and machine can overheat, Replace damaged battery. causing fire. Flush eyes skin immediately with water. VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 6 (800) 526-8817 • www.vanair.com...
Page 17: Compressed Air Can Cause Injury
Read Owner’s Manual before guards in a safe location using or servicing unit. wearing proper face, hand, and body Stop engine and release air protection. pressure before servicing. VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 7 (800) 526-8817 • www.vanair.com...
Page 18: Overuse Can Cause Overheating
(if applicable) Be sure this welding machine is installed and manuals. grounded according to this manual. interference still occurs, take extra measures such as moving the welding VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 8 (800) 526-8817 • www.vanair.com...
Page 19: California Proposition 65 Warnings
Quincy, MA 02269-9101 (phone: 617-770- years of research, a special blue ribbon 3000, site: www.nfpa.org committee of the National Research Council www.sparky.org). concluded that: “The body of evidence, in the VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 9 (800) 526-8817 • www.vanair.com...
Page 20: Safety Decals
Pacemaker wearers consult your doctor for information. before welding or going near welding operations. If cleared by your doctor, then following above procedures recommended. VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH-2015) PAGE - 10 (800) 526-8817 • www.vanair.com...
Page 21: Section 2: Specifications
Adjustable Air Pressure Control Cut-in Pressure: 90 PSI / Cut-out Pressure: 125 PSI Settings Air Service Outlets Two (2) on Control Panel - Remote, One (1) on Machine - Standalone VANAIR MANUFACTURING, INC. PAGE - 11 090043-OP_r0 (MARCH -2015) (800) 526-8817 • www.vanair.com...
Page 22 Dimensions (Overall Package) Length (in) Width (in) Height (in) Weight (lbs) (wet) Skid-Mount 50.34 18.20 24.24 Tank-Mount, 30 Gallon 50.74 19.00 40.75 Tank-Mount, 8 Gallon 50.50 21.00 30.25 VANAIR MANUFACTURING, INC. PAGE - 12 090043-OP_r0 (MARCH -2015) (800) 526-8817 • www.vanair.com...
Page 23: Section 3: Installation
Contact switches, etc.) in locations where Vanair Manufacturing, Inc. to report missing exposure to water or moisture will be items, incorrect part number, or other most minimized.
Page 24: Service Body Prep
It is recommended that the machine be ® surface. Isolators are available from Vanair mounted on a vibration isolating material order bolt down isolator, part number such as 1/4” neoprene rubber pads.
Page 25: Installing The Remote Control Panel
IMPORTANT accessible wiring, piping, etc. • Service output location. The Vanair-supplied fuel pump includes an internal check valve; do not add an To prepare and install the remote air tank, external check valve. follow these guidelines.
Page 26 Not applicable to some machine applications. Air reservoir tanks contain relief valves (not shown): Consult appropriate Section 7.9A, 7.9B or 7.9C for relief valve location. Figure 4-1: Main Machine Component Locations VANAIR MANUFACTURING, INC. PAGE - 16 090043-OP_r0 (MARCH -2015) (800) 526-8817 • www.vanair.com...
Page 27: Section 4: Operation
All machine package maximum operation angles of tilt are fifteen degrees (15°). Before performing maintenance or repair operations on the machine, disconnect battery and relieve air pressure. VANAIR MANUFACTURING, INC. PAGE - 17 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 28: Engine Start-Up
] until the equipment. Some surfaces and engine starts (when the switch is let components may be hot. go, it will revert back to ON position). VANAIR MANUFACTURING, INC. PAGE - 18 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 29 VOLTS/AMPS MANUAL ADJUSTMENT ENGINE POWER SWITCH/KEY TACHOMETER/HOUR METER ENGINE CHOKE AIR PRESSURE GAUGE LOW FUEL INDICATOR LAMP AIR OUTLET SERVICE PORTS Figure 4-3: Optional Remote Instrument Panel VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH - 2015) PAGE - 19 (800) 526-8817 • www.vanair.com...
Page 30: Engine Throttle Control Functions
® SECTION 4: OPERATION AIR N ARC 150 SERIES Vanair Mfg., Inc. recommends that the at idle speed the next time it is following procedure is used for routine started. shutdowns in order to keep the system in optimal condition, and minimimize undue...
Page 31: Operating The Welder
NOTE If a longer welding lead is desired, 4.4 OPERATING THE WELDER optional 50 ft. lead segments may be purchased from Vanair for a maximum lead length of 100 ft. WARNING 3. Select the appropriate electrode for Before attempting any welding...
Page 32: Operating The Welder (Optional Remote Panel)
If the customer wishes to reverse the 15-40 VOLTS welding polarity, a polarity reversing adapter is available from your local dealer. Figure 4-5 Variable Power Dial Adjustment VANAIR MANUFACTURING, INC. PAGE - 22 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 33: Cc (Constant Current) Mode
Bodily harm and equipment damage may optional 25 and 50 ft. lead segments may occur. ® be purchased from Vanair Manufacturing, Inc. for a maximum lead 2. Select the appropriate electrode for the length of 100 ft. material and process being performed.
Page 34: Operating The Battery Booster/Charger
Procedure). CHARGER 4. On the control panel, place the DC Charger/Welder switch in welder The Vanair state-of-the-art battery charging mode. Place the CC/CV switch in CV module and the optional battery charging mode. cables add further versatility to the 150 Series Power System.
Page 35: Connection - Disconnection Sequence And Operation
6. To disconnect the charging system, generator, welder, hydraulic pump) used place the DC Welder/Charger simultaneously will have an adverse affect of engine running at full throttle. VANAIR MANUFACTURING, INC. 090043-OP_r0 (MARCH - 2015) PAGE - 25 (800) 526-8817 • www.vanair.com...
Page 36: Operating The Generator
(20.4 amps @ 240V or 40.8 amps @ 120V When the air tank pressure builds to 125 psi, for each outlet) continuous. a spring loaded valve in the pilot valve VANAIR MANUFACTURING, INC. PAGE - 26 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 37: Operating The (Optional) Battery Charger For Stand-Alone Systems
Vanair Service Support at 844-VAN-SERV This causes the air in the compressor to vent (844-826-7378). to the atmosphere.
Page 38: Extreme Condition Operation
To avoid damage to the sensitive electronic controlled equipment from voltage spikes, the battery cables of the battery to be charged must be disconnected. Vanair Manufacturing is not responsible for any damage that might occur if this step is not followed. 4.10 EXTREME CONDITION...
Page 39: Section 5: Maintenance
Vanair especially requires that a consistent service regimen be established for engine oil WARNING changes, and engine and compressor air filter servicing. The following schedule is...
Page 40 ® SECTION 5: MAINTENANCE AIR N ARC 150 SERIES VANAIR MANUFACTURING, INC. PAGE - 30 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 41 ® AIR N ARC 150 SERIES SECTION 5: MAINTENANCE VANAIR MANUFACTURING, INC. 090043-OP_r0 ( PAGE - 31 MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 42 ® SECTION 5: MAINTENANCE AIR N ARC 150 SERIES VANAIR MANUFACTURING, INC. PAGE - 32 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 43 ® AIR N ARC 150 SERIES SECTION 5: MAINTENANCE VANAIR MANUFACTURING, INC. 090043-OP_r0 ( PAGE - 33 MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 44: Replacement Parts
Air N Arc storing the machine package for periods Replacement Parts will void the warranty. of non-use, consult Section 5.6.2, Long Term Storage. VANAIR MANUFACTURING, INC. PAGE - 34 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 45: Adjusting Compressor Cut-In / Cut-Out Pressure
1/4 - adjustment nut, and the valve body to 1/2 turn interval, and tighten the insure that it has not changed position. locknut. VANAIR MANUFACTURING, INC. 090043-OP_r0 PAGE - 35 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 46: Adjusting The Engine Speed
Refer to shield per Section 5.5.3.1. Section 7.7, Belt Guard Assembly (parts VANAIR MANUFACTURING, INC. PAGE - 36 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 47: Compressor Belt Sizing
4. If belt is too loose, then it will need to be resized. Consult The poly link belt is placed so that the tab ends of the links are facing inward, toward the pulleys. VANAIR MANUFACTURING, INC. 090043-OP_r0 PAGE - 37 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 48: Compressor Belt Link Disengagement
Section 5.5.3.6, Compressor Belt 5.5.3.6 COMPRESSOR BELT ASSEMBLY Assembly. Once the proper length of the belt has been determined (refer to Section 5.5.3.4), and VANAIR MANUFACTURING, INC. PAGE - 38 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 49: Tracking Compressor Belt Onto Pulley Groove
(compressor through the slot. belt tracks to outside engine pulley), taking care that the belt’s VANAIR MANUFACTURING, INC. 090043-OP_r0 PAGE - 39 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 50 #1. Continue to set the belt into arrow of rotation on the the proper groove on the compressor pulley (see Figure 5- compressor pulley and engine 4 [D]). pulley. VANAIR MANUFACTURING, INC. PAGE - 40 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 51: Re-Tensioning Or Replacing The Generator Serpentine Belt
Consult Section 5.5.3.3, Steps #3 is properly tensioned. and #4 to remove the compressor belts. VANAIR MANUFACTURING, INC. 090043-OP_r0 PAGE - 41 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 52: Servicing The Fuse
When changing the fuse, or dealing directly with any function of the electrical system maintenance, always be aware of the safety warnings given in Section 1, Safety. VANAIR MANUFACTURING, INC. PAGE - 42 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 53: Storage And Intermittent Use
3. Remove the blown fuse [E], and replace with new fuse. 4. Replace the fuse housing cap to secure the fuse. VANAIR MANUFACTURING, INC. 090043-OP_r0 PAGE - 43 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 54 ® SECTION 5: MAINTENANCE AIR N ARC 150 SERIES BLANK PAGE VANAIR MANUFACTURING, INC. PAGE - 44 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 55: Section 6: Troubleshooting
All avail- contact your local dealer or the Vanair Ser- able data concerning the trouble should be vice Department. systematically analyzed before undertaking any repairs or component replacement.
Page 56: Troubleshooting Guide
Check throttle solenoid. Replace if Engine does not speed up necessary. Check throttle relay; replace if necessary. Governor stuck Free governor and lubricate if necessary. Continued on next page VANAIR MANUFACTURING, INC. PAGE - 46 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 57 Wrong fuel type fill Use only gasoline—do not use E85, etc. Refer to Engine Owner’s Manual for information on engine fuel type to use. Continued on next page VANAIR MANUFACTURING, INC. PAGE - 47 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 58 Air demand too high Check for leaks and take corrective action. Check air tools for wear, damage, or malfunctions. Replace or repair. Continued on next page VANAIR MANUFACTURING, INC. PAGE - 48 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 59 Dirty or plugged inter-cooler tubes Remove and clean inter-cooler tubes. Worn or defective compressor valves Replace worn parts. Worn piston, worn out rings Replace worn parts. Continued on next page VANAIR MANUFACTURING, INC. PAGE - 49 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 60 Pilot valve sticking Replace pilot valve. Incorrect compressor speed Adjust speed. Discharge OSHA check valve Replace check valve. Unloaders stuck Repair or replace unloaders. Continued on next page VANAIR MANUFACTURING, INC. PAGE - 50 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 61 Check and replace worn or broken valves. Inspect check valve; it may knock at Remove and clean check valve. low pressures Bearing failure Replace compressor. Continued on next page VANAIR MANUFACTURING, INC. PAGE - 51 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 62 Carefully wipe off any contaminants to receptacle connectors before re-connecting. Replace any worn or damaged cables or receptacles. Contact the Vanair Service Department if behavior persists. Welding function is not drawing enough If running more than one function operating power simultaneously, turn off competing function.
Page 63: Extreme Condition Operation
Consult Section 2, Specifications of this the generator switch to warm up the machine manual and the Engine Owner’s Manual (Refer to Section 4, Figure 4-2 [A2]). for acceptable fuel specifications. VANAIR MANUFACTURING, INC. PAGE - 53 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 64: High Temperature Operation
110°F (43.3°C). Extra care should be taken to keep the engine and air compressor clean and to not restrict the air flow around the unit. VANAIR MANUFACTURING, INC. PAGE - 54 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 65: Section 7: Illustrated Parts List
NOTE When contacting the Service Department, please have machine serial number on hand to quickly expedite service. Figure 7-1: Machine Package Serial Number Plate Location VANAIR MANUFACTURING, INC. PAGE - 55 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 66 For information on storing the machine package for periods of non-use, consult Section 5.6.2, Long Term Storage. VANAIR MANUFACTURING, INC. PAGE - 56 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 67 Section 7 to best locate and identify the damaged part(s). TABLE 7B: MAINTENANCE TRACKING LOG DATE DESCRIPTION OF MAINTENANCE PART(S) REPLACED VANAIR MANUFACTURING, INC. PAGE - 57 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 68 AIR N ARC 150 SERIES 7.2A AIR N ARC 150 SYSTEMS ASSEMBLIES (8 GALLON , 12 12/24 STAND ALONE WELD ONLY V AND V BATTERY BOOST PA6130035ID_r1 VANAIR MANUFACTURING, INC. PAGE - 58 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 69 ID, CONTROL ASSEMBLY 8 GAL PA6120091ID ID, AIR TANK PRO 8 GALLON REMOTE PA73089ID HOSE, SERVICE AIR OUT TU271164 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 59 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 70 AIR N ARC 150 SERIES 7.2B AIR N ARC 150 SYSTEMS ASSEMBLIES (30 GALLON , 12 12/24 STAND ALONE WELD ONLY V AND V BATTERY BOOST PA6130038ID_r2 VANAIR MANUFACTURING, INC. PAGE - 60 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 71 ID, AIR TANK, 30 GAL STAND ALONE PA89907ID GROMMET, BLACK RUBBER, .875ID PR22730 HOSE, FUEL 1/4" SAE 30R9 x 40" LONG TU269439 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 61 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 72 AIR N ARC 150 SERIES 7.2C AIR N ARC 150 SYSTEMS ASSEMBLIES ( STAND , 12 12/24 ALONE SKID MOUNT V AND V BATTERY BOOST PA6130039ID_r1 VANAIR MANUFACTURING, INC. PAGE - 62 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 73 ID, CONTROL ASS'Y SKID STAND ALONE PA6120095ID ASS'Y, FUEL PUMP REMOTE FUEL PA6140009ID GROMMET, BLACK RUBBER, .875ID PR22730 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 63 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 74: 2/24V Battery Boost)
AIR N ARC 150 SERIES 7.2D AIR N ARC 150 SYSTEMS ASSEMBLIES (8 GALLON , 12 12/24 REMOTE PANEL WELD ONLY V AND V BATTERY BOOST PA6130023-001ID_r0 VANAIR MANUFACTURING, INC. PAGE - 64 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 75 ID, AIR TANK PRO 8 GALLON REMOTE PA73089ID PLUG, 1-1/4 DIA, RIBBED BLACK PR96951 TUBING, COPPER 1/4” OD .030 WALL TU67293 0.7 FT PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 65 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 76: 12/24V Battery Boost)
AIR N ARC 150 SERIES 7.2E AIR N ARC 150 SYSTEMS ASSEMBLIES (30 GALLON , 12 12/24 REMOTE PANEL WELD ONLY V AND V BATTERY BOOST PA6130028-001ID_r4 VANAIR MANUFACTURING, INC. PAGE - 66 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 77 ID, ELECTRICAL SYSTEM REMOTE (ISO GROUND) PA6120077-02ID ID, CONTROL ASSY 30 GAL. PA6120201ID TUBING, COPPER .030 WALL TU67293 0.7 FT PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 67 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 78: 12/24V Battery Boost)
AIR N ARC 150 SERIES 7.2F AIR N ARC 150 SYSTEMS ASSEMBLIES ( REMOTE , 12 12/24 PANEL SKID MOUNT WELD ONLY V AND V BATTERY BOOST PA6130043ID_r1 VANAIR MANUFACTURING, INC. PAGE - 68 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 79 ID, ELECTRICAL SYSTEM, REMOTE PA6120077ID ID, CONTROL ASS'Y 30 GAL AND SKID, REMOTE PA6120083ID PLUG, 1-1/4 DIA, RIBBED BLACK PR96951 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 69 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 80: Compressor And Parts
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.3 COMPRESSOR AND PARTS PA6010076-001ID_r3 VANAIR MANUFACTURING, INC. PAGE - 70 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 81 OIL, HYD ISO68 SE99966 Consult Table 7A: Recommended Spare Parts List for compressor air filter maintenance parts. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 71 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 82: A Frame Assembly (All 8 Gallon Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.4A FRAME ASSEMBLY ( GALLON MODELS SEE NOTE. PA6030023ID_r2 VANAIR MANUFACTURING, INC. PAGE - 72 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 83 GROMMET, BLACK RUBBER, 1.25ID PR75487 GROMMET, BLACK RUBBER, .50ID PR52720 Note :Drawing may not depict actual part shape. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 73 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 84: B Frame Assembly (All 30 Gallon Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.4B FRAME ASSEMBLY ( GALLON MODELS Note I. PA6030026ID_r0 VANAIR MANUFACTURING, INC. PAGE - 74 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 85 GROMMET, BLACK RUBBER, 2.25ID PR52720 GROMMET, BLACK RUBBER, 2.25ID PR74492 Note :Drawing may not depict actual part shape. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 75 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 86: C Frame Assembly (All Skid-Mount Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.4C FRAME ASSEMBLY ( ALL SKID MOUNT MODELS Note I. PA6030029ID_r1 VANAIR MANUFACTURING, INC. PAGE - 76 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 87 GROMMET, BLACK RUBBER, 2.25ID PR52720 GROMMET, BLACK RUBBER, 2.25ID PR74492 Note :Drawing may not depict actual part shape. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 77 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 88: A Control Assembly (Skid Mount, 8 Gallon, 30 Gallon Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.5A CONTROL ASSEMBLY ( , 30 SKID MOUNT GALLON GALLON MODELS PA6120210ID_r0 VANAIR MANUFACTURING, INC. PAGE - 78 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 89 FI53603 PIPE BRASS, 1/4 NPT, 90 DEG. STREET ELBOW FI65532 TUBE, UNLOADER 1/4 COPPER TU274736 0.804 ft PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 79 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 90: B Control Assembly (8 Gallon, Stand Alone Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.5B CONTROL ASSEMBLY (8 GALLON STAND ALONE MODELS PA6120091ID_r2 VANAIR MANUFACTURING, INC. PAGE - 80 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 91 PIPE BRASS, 1/4 NPT, 90 DEG. STREET ELBOW FI65532 PIPE BRASS, BULKHEAD 3/8 NPT FI67811 ELBOW, COMP 1/4MNPT x 1/4 TUBE FI79286 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 81 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 92: C Control Assembly (30 Gallon, Stand Alone Models)
AIR N ARC 150 SERIES 7.5C CONTROL ASSEMBLY (30 GALLON STAND ALONE MODELS SEE NOTE 2 SEE NOTE 2 SEE NOTE 2 SEE NOTE 2 PA6120201ID_r0 VANAIR MANUFACTURING, INC. PAGE - 82 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 93 PIPE BRASS, BULKHEAD 1/4 NPT FI45068 PIPE, BUSHING, REDUCING, 1/4 M FI54915 Nut and washer included with bulkhead (item #9). PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 83 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 94: D Control Assembly (Remote Panel, Skid Mount Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.5D CONTROL ASSEMBLY ( REMOTE PANEL SKID MOUNT MODELS PA6120083ID_r4 VANAIR MANUFACTURING, INC. PAGE - 84 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 95 PIPE BRASS, BULKHEAD 1/4 NPT FI45068 PIPE, BUSHING, REDUCING, 1/4M FI54915 Nut and washer included with bulkhead. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 85 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 96: E Control Assembly (All Stand Alone, Skid Mount Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.5E CONTROL ASSEMBLY ( ALL STAND ALONE SKID MOUNT MODELS PA6120095ID_r3 VANAIR MANUFACTURING, INC. PAGE - 86 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 97 PIPE, BUSHING, REDUCING, 1/4M FI54915 PIPE BRASS, 1/4 NPT, 90 DEG. STREET ELBOW FI65532 Nut and washer included with bulkhead. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 87 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 98: F Control Assembly (All 8 Gallon, Remote Panel Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.5F CONTROL ASSEMBLY ( GALLON REMOTE PANEL MODELS PA6120078ID_r2 VANAIR MANUFACTURING, INC. PAGE - 88 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 99 PIPE BRASS, 1/4 NPT, 90 DEG. STREET ELBOW FI65532 ELBOW, COMP 1/4 MNPT x 1/4 TUBE FI79286 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 89 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 100: A Engine And Drive Parts (All Stand Alone Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.6A ENGINE AND DRIVE PARTS ( ALL STAND ALONE MODELS PA6100022ID-002_r0 VANAIR MANUFACTURING, INC. PAGE - 90 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 101 EN271037 HARNESS, STAND ALONE DC POWER EP271067 HARNESS, CHOKE SWITCH JUMPER EP2711887 TUBE, EXHAUST 1.25 DIA TU270889 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 91 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 102: B Engine And Drive Parts (All Remote Panel Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.6B ENGINE AND DRIVE PARTS ( ALL REMOTE PANEL MODELS PA6100018-002_r0 VANAIR MANUFACTURING, INC. PAGE - 92 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 103 DR57469Z HOSE, DRAIN 3/8 x 12"LG 3/8NPT EN22698 ENGINE, 18HP V-TWIN EN271037 TUBE, EXHAUST 1.25 DIA. TU270889 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 93 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 104: Belt Guard Assembly
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.7 BELT GUARD ASSEMBLY PA6030024-001_r0 VANAIR MANUFACTURING, INC. PAGE - 94 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 105 TENSIONER, ROTARY, SMALL DR25596 IDLER, 1 WIDTH, 3DIA. FLAT DR32958 SCREW, SER WASH 3/8-16 x 1 FA86645 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 95 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 106: A Electrical System (All Models Except Remote Panel Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.8A ELECTRICAL SYSTEM ( ALL MODELS EXCEPT REMOTE PANEL MODELS PA6120090-02ID_r0 (1 of 2) VANAIR MANUFACTURING, INC. PAGE - 96 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 107 MOUNT * 12V BATTERY BOOST OPTION: replace EA42863 with EA62548. WELD ONLY OPTION: replace EA42863 with EA96353. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 97 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 108 ® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.8A ELECTRICAL SYSTEM ( ALL MODELS EXCEPT REMOTE PANEL MODELS PA6120090-02ID_r0 (2 of 2) VANAIR MANUFACTURING, INC. PAGE - 98 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 109 MOUNT * 12V BATTERY BOOST OPTION: replace EA42863 with EA62548. WELD ONLY OPTION: replace EA42863 with EA96353. PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 99 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 110: B Electrical System (All Remote Panel Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.8B ELECTRICAL SYSTEM ( ALL REMOTE PANEL MODELS PA6120077-02ID_r0 (1of2) VANAIR MANUFACTURING, INC. PAGE - 100 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 111 BATTERY, 12 VOLT 35 AMP MA31821 CON & PRO DEEP SHEAVE, SERPENTINE, 6 A12924Z BOOT, BREAKER, PANEL PR81817 GROOVE MOUNT PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 101 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 112 ® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.8B ELECTRICAL SYSTEM ( ALL REMOTE PANEL MODELS PA6120077-02ID_r0 (2of2) VANAIR MANUFACTURING, INC. PAGE - 102 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 113 BATTERY, 12 VOLT 35 AMP MA31821 CON & PRO DEEP SHEAVE, SERPENTINE, 6 A12924Z BOOT, BREAKER, PANEL PR81817 GROOVE MOUNT PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 103 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 114: A Air Storage Assembly (All 8 Gallon, Stand Alone And Remote Panel Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.9A AIR STORAGE ASSEMBLY ( GALLON STAND ALONE AND REMOTE PANEL MODELS PA73089ID_r1 VANAIR MANUFACTURING, INC. PAGE - 104 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 115 MOUNT, AIR TANKS A18801P VALVE, CHECK 1/2 NPT M-F CO35980 VALVE, RELIEF 150 PSI 1/4 NPT MALE CO93614 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 105 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 116: B Air Storage Assembly (All 30 Gallon, Stand Alone Models)
SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.9B AIR STORAGE ASSEMBLY ( GALLON STAND ALONE MODELS PA89907ID_r2 7.9C AIR STORAGE ASSEMBLY ( GALLON REMOTE PANEL MODELS PA23932ID_r1 VANAIR MANUFACTURING, INC. PAGE - 106 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 117 SCREW, SER WASH 3/8-16 x 1 FA86645 TEE, BRASS BRANCH TEE FI41491 VALVE, PETCOCK VALVE, 1/4 NPT FI74953 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 107 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 118: A Fuel Tank Assembly (All 8 Gallon Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.10A FUEL TANK ASSEMBLY ( GALLON MODELS OA53433_r4 VANAIR MANUFACTURING, INC. PAGE - 108 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 119 HOSE, FUEL 1/4 SAE 30R9 x 18” LG TU269439 HOSE, FUEL 3/16 SAE 30R7 x 8” LG TU28641 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 109 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 120: B Fuel Tank Assembly (All 30 Gallon Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.10B FUEL TANK ASSEMBLY ( GALLON MODELS OA83450_r3 VANAIR MANUFACTURING, INC. PAGE - 110 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 121 HOSE, FUEL 5/16 SAE 30R9 x 18” LG TU270137 HOSE, FUEL 3/16 SAE 30R7 x 8” LG TU27641 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 111 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 122: C Fuel Tank Assembly (All Fuel Pump/Remote Models)
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.10C FUEL TANK ASSEMBLY ( ALL FUEL PUMP REMOTE MODELS PA6140009ID_r0 VANAIR MANUFACTURING, INC. PAGE - 112 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 123 FUEL PUMP, 12V SOLID STATE, 1.5-2.5 PSI MA53288 FILTER, INLINE FUEL 1/4-5/16" RC81465 HOSE, FUEL 1/4" X 4" LG. SAE 30R9 TU269439 PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE SERIAL NUMBER. VANAIR MANUFACTURING, INC. PAGE - 113 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 124: Decal Locations
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.11 DECAL LOCATIONS VANAIR MANUFACTURING, INC. PAGE - 114 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 125 ® AIR N ARC 150 SERIES SECTION 7: ILLUSTRATED PARTS LIST 7.11 DECAL LOCATIONS ITEM DESCRIPTION PART NUMBER DECAL, VANAIR LOGO CONTACT INFO DL269675 DECAL, POWERTWIST BELT INFO DL269690 DECAL, CAUTION WARNING DL270120 DECAL, NOTICE SWITCHES DL270119 DECAL, INFO VANAIR...
Page 126: Wiring Diagram - Air N Arc 150
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.12 WIRING DIAGRAM - AIR N ARC 150 ID271665_r2 VANAIR MANUFACTURING, INC. PAGE - 116 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 127: Wiring Diagram - Air N Arc 150 Remote Panel
® AIR N ARC 150 SERIES SECTION 7: ILLUSTRATED PARTS LIST 7.13 WIRING DIAGRAM - AIR N ARC 150 - REMOTE PANEL ID272688_r0 VANAIR MANUFACTURING, INC. PAGE - 117 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 128: Flow Schematic Diagram
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.14 FLOW SCHEMATIC DIAGRAM (1 OF 4) ID274888_r0(1of4) VANAIR MANUFACTURING, INC. PAGE - 118 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 129 ® AIR N ARC 150 SERIES SECTION 7: ILLUSTRATED PARTS LIST 7.14 FLOW SCHEMATIC DIAGRAM (2 OF 4) ID274888_r0(2of4) VANAIR MANUFACTURING, INC. PAGE - 119 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 130 ® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.14 FLOW SCHEMATIC DIAGRAM (3 OF 4) ID274888_r0(3of4) VANAIR MANUFACTURING, INC. PAGE - 120 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 131 ® AIR N ARC 150 SERIES SECTION 7: ILLUSTRATED PARTS LIST 7.14 FLOW SCHEMATIC DIAGRAM (4 OF 4) ID274888_r0(4of4) VANAIR MANUFACTURING, INC. PAGE - 121 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 132: A Installation And Dimensions - 8 Gallon Tank
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.15A INSTALLATION AND DIMENSIONS - 8 GALLON TANK 050666ID_ r1 VANAIR MANUFACTURING, INC. PAGE - 122 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 133: B Installation And Dimensions - 30 Gallon Tank
® AIR N ARC 150 SERIES SECTION 7: ILLUSTRATED PARTS LIST 7.15B INSTALLATION AND DIMENSIONS - 30 GALLON TANK 050677-003ID_r0 VANAIR MANUFACTURING, INC. PAGE - 123 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 134: C Installation And Dimensions - Skid Mount
® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES 7.15C INSTALLATION AND DIMENSIONS - SKID MOUNT 050672-003ID_r0 VANAIR MANUFACTURING, INC. PAGE - 124 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 135: Hose Installation Guide
Allow ample free length for flexing. VANAIR MANUFACTURING, INC. PAGE - 125 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 136 ® SECTION 7: ILLUSTRATED PARTS LIST AIR N ARC 150 SERIES BLANK PAGE VANAIR MANUFACTURING, INC. PAGE - 126 090043-OP_r0 (MARCH - 2015) (800) 526-8817 • www.vanair.com...
Page 137 Vanair Manufacturing, Inc. 10896 West 300 North Michigan City, IN 46360 Phone: (219) 879-5100 (800) 526-8817 Service: (844) VANSERV [844-826-7378] Service Fax: (219) 879-5335 Parts Fax: (219) 879-5340 Sales Fax: (219) 879-5800 www.vanair.com Printed in the U.S.A. Specifications Subject to Change Without Prior...

Vanair ALL-IN-ONE POWER SYSTEM AIR N ARC 150 Series Operations Manual & Parts List

Table of Contents

Warranty

Warranty Claim Procedure

Section 7: Illustrated Parts List (Continued)

Section 1: Safety

Section 1: Safety (Continued)

Section 2: Specifications

Section 3: Installation

Section 3: Installation (Continued)

Section 4: Operation

Section 5: Maintenance

Section 6: Troubleshooting

Section 7: Illustrated Parts List

Quick Links

Troubleshooting

Related Manuals for Vanair ALL-IN-ONE POWER SYSTEM AIR N ARC 150 Series

Summary of Contents for Vanair ALL-IN-ONE POWER SYSTEM AIR N ARC 150 Series

Table of Contents