Section 1: Safety; General Information; Dangers, Warnings, Cautions, And Notes; International Safety Symbol - Vanair ALL-IN-ONE POWER SYSTEM AIR N ARC 150 Series Operations Manual & Parts List

®
AIR N ARC 150 SERIES

1.1 GENERAL INFORMATION

The products
Manufacturing,
manufactured
maintenance. However, it is ultimately the
responsibility of the users and maintainers
for safe use of this equipment. Part of this
responsibility is to read and be familiar with
the contents of this manual before operation
or performing maintenance actions.
IMPORTANT
It is mandatory that all operators read this
manual before operating or servicing the
Air N Arc 150 Series All-In-One Power
System. Failure to do so could result in
death, bodily injury or damage to
1.2 DANGERS, WARNINGS,
CAUTIONS, AND NOTES
Identifies actions or conditions which
will cause death, severe injury,
equipment damage or destructive
malfunctions.
Identifies actions or conditions which
may cause death, severe injury,
equipment damage or destructive
malfunctions.
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
SECTION 1:
SAFETY
provided by Vanair
Inc. are designed
for safe operation
equipment.
DANGER
WARNING
090043-OP_r0 (MARCH-2015)
®
Identifies actions or conditions which
and
will or can cause injuries, equipment
and
Additional information (or existing
information) which should be brought to
the attention of operators/maintainers
affecting safety, operation, maintenance,
1.3 INTERNATIONAL SAFETY
SYMBOL
The symbols shown and defined in Section
1: Safety are used throughout this manual to
call attention to and identify possible
hazards.
The international warning symbol shown
above is used on all decals, labels and signs
that concern information pertaining to bodily
harm. When you see the international
warning symbol, pay extremely careful
attention and follow the given instructions or
indications to avoid any possible hazard.

1.4 ARC WELDING HAZARDS

1.4.1

ELECTRICAL SHOCK CAN KILL

SECTION 1: SAFETY

CAUTION
damage or malfunctions.
NOTE
or warranty requirements.
Touching live electrical parts
can cause fatal shocks or
severe burns. The electrode
and work circuit
electrically live whenever the
are
PAGE - 1