Directive And Standards; Documentation; Abbreviations Used - SMC Networks SI Unit Operation Manual

Table of Contents

Advertisement

1.4. Directive and standards

The standards to which the SI Unit conforms are listed in the certificate issued by the approval body and in the
EC declaration of conformity.
1.4.1. Intended use
The EX260-FPS1 is designed exclusively for use in a PROFIsafe system and fulfils the PROFINET
guidelines as defined by PI (PNO). It can only perform its tasks in the system if it is used according to the
specifications in this document.
Only use the SI Unit according to the defined technical data and ambient conditions: refer to
"Specifications".

1.5. Documentation

1.5.1. Correctness and availability of documentation
Always use the latest documentation for this product. Changes or additions to documentation can be found
on the Internet (refer to: www.smcworld.com).
1.5.2. PROFIsafe user manuals:
For the safe controller used
For the failsafe PROFIsafe I/O modules used
For PROFIsafe system function blocks
Observe the information on PROFINET, and PROFIsafe which is available on the Internet
(refer to: www.profisafe.net).

1.6. Abbreviations used

Abbreviation
SIL
SILCL
Cat.
PL
Abbreviation
PELV
SELV
Explanations of terms and abbreviations used in the context of PROFIsafe: refer to
PROFIsafe".
Table 1-1 Abbreviations for safety requirements
Meaning
Safety integrity level
SIL claim limit
Category
Performance level
Table 1-2 General Abbreviations
Protective extra-low voltage according to EN 61140
Separated extra-low voltage according to EN 61140
- 12 -
Standard
IEC 61508
EN 62061
EN ISO 13849-1
EN ISO 13849-1
Meaning
Section 5
Example
SIL 2, SIL3
SIL CL 3
Cat. 2, Cat. 4
PL d, PL e
"Appendix A: Glossary for
No.EX※※-OMU1006-B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SI Unit and is the answer not in the manual?

This manual is also suitable for:

Ex260-fps1

Table of Contents