10.2.4 Inlet chemical trap
The inlet chemical trap protects the pump against chemically active gases.
Product
ITC20K Inlet chemical trap*
10.2.5 Solenoid operated gas-ballast control valve
The valve provides remote or automatic on/off control of gas-ballast. The valve can be
connected to shut-off ballast to prevent the return of air to the vacuum system when the
pump is switched off.
Product
EBV20 gas-ballast control
valve
10.2.6 Foreline trap
Use a foreline trap on a clean pumping system to prevent back-migration of rotary pump
oil vapour into your vacuum system.
Product
FL20K Foreline trap*
10.2.7 Solenoid operated pipeline valve
Fit the pipeline valve between the vacuum system and the pump inlet to provide
additional system protection when the pump is switched off.
Product
PV10EK
valve*
10.2.8 Outlet mist filter
The outlet mist filter separates and traps oil droplets in the pump outlet to prevent oil
mist discharge.
Product
EMF3 Outlet mist filter
10.2.9 Oil drain extension
Fit the oil drain extension between the oil drain port on the pump and the oil drain‑plug
to make the drainage of oil from the pump easier. The pack includes an oil drain
extension tube for use when oil is gravity drained.
Product
Oil drain extension
A37132880_F - Spares and accessories
Electrical supply
220‑240 V, single-phase, 50‑60 Hz
100‑120 V, single-phase, 50‑60 Hz
Electrical supply
200‑240 V, single-phase, 50‑60 Hz
110‑127 V, single-phase, 50‑60 Hz
Page 38
Item number
A44410000
Item number
A50006930
A50006984
Item number
A13305000
Item number
C41101000
C41103000
Item number
A46220000
Item number
A50503000