Table of Contents
Advertisement
INSTALLATION
H
If you need to fix by using steel anchors for concrete and masonry
you must follow the following procedures:
•
Check the floor leveling and if necessary to shim mounting
elements in order to achieve perfect alignment of the com-
ponents;
•
Holes must be the same size as those in the base plate. It
is possible to fix the base plate whose existing holes can
be used as a guide to drill the floor with precision in a single
operation;
1
Drill
ED. 10 - 07/2020 - Cod. 150133
Pneumatic hoist twin mast for 200 litres
•
•
Recheck your transportation plans are level.
Fig. 1H
2
Insert the dowel
The depth of the holes drilled in the concrete of no importance
for the expansion of the gusset and does not affect his estate
provided that it is made of a puncture with minimum depth
sufficient to allow the full roll-out of the plug;
Insert the expansion bolts by tightening until completely
locking.
3
Screw the dowel
www.larius.com
7
Advertisement
Table of Contents
