Samoa Larius Viking Liner Plus 2K Operating And Maintenance Manual
  1. Manuals
  2. Brands
  3. Samoa Manuals
  4. Industrial Equipment
  5. Larius Viking Liner Plus 2K
  6. Operating and maintenance manual

Samoa Larius Viking Liner Plus 2K Operating And Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
w w w . l a r i u s . c o m
Viking Liner
PLus
Airless professional road marking
Bicomponent version 2k 1:1
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Larius Viking Liner Plus 2K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Samoa Larius Viking Liner Plus 2K

Summary of Contents for Samoa Larius Viking Liner Plus 2K

  • Page 1 w w w . l a r i u s . c o m Viking Liner PLus Airless professional road marking Bicomponent version 2k 1:1...
  • Page 2 This manual is to be considered as an English language translation of the original manual in Italian. The manufacturer shall bear no responsibility for any damages or inconveniences that may arise due to the incorrect translation of the instructions contained within the original manual in Italian. Due to a constant product improvement programme, the factory reserves the right to modify technical details mentioned in this manual without prior notice.

  • Page 3: Table Of Contents

    VIKING LINER PLUS 2K Viking Liner PLus 2k Professional road marking self-propelled INDEX WARNINGS ..................................2 WORKING PRINCIPLE ..............................3 TECHNICAL DATA ................................4 DESCRIPTION OF THE EQUIPMENT ..........................6 CONTROLS DESCRIPTION ............................10 TRANSPORT AND UNPACKING ..........................11 SAFETY RULES ................................11 CONDITIONS OF GUARANTEE ..........................12 TUBES CONNECTION ...............................12 STARTING THE COMBUSTION ENGINE ........................14 WASHING THE NEW EQUIPMENT ...........................15...

  • Page 4: Awarnings

    VIKING LINER PLUS 2K WARNINGS The table below provides the meaning of the symbols used in this manual in relation to using, earthing, operating, maintaining, and repairing of this equipment. • Read this operator’s manual carefully before using the equipment. •...

  • Page 5: Bworking Principle

    VIKING LINER PLUS 2K WORKING PRINCIPLE wear caused both by traffic and atmospheric agents. The refractive effect is obtained though the release of refractive spheres from an appropriate tank Fig. 1B. The VIKING LINER PLUS is a professional bicomponent airless These spheres automatically “fall”...

  • Page 6: Ctechnical Data

    VIKING LINER PLUS 2K WORKING PRINCIPLE The diaphram movement produces a “depression”. The VIKING LINER PLUS line marker uses a diaphram pump. The product is sucked, pushed towards the pump outlet and then This pump is used for high pressure painting without air (from sent to the gun through the high pressure flexible hose.
  • Page 7 VIKING LINER PLUS 2K Fig. 1C StaNdaRd EQUIPMENt aCCESSORIES MOdELS N° 2 Filters with pressure gauge Rif. 4405/4 N° 2 Suction - recirculation systems Pneumatic bead blasting gun N° 4 Super fast clean bases Rif. 4038 N° 2 Super fast clean nozzles 11-40 Laser pointer kit Rif.

  • Page 8: Ddescription Of The Equipment

    VIKING LINER PLUS 2K DESCRIPTION OF THE EQUIPMENT Fig. 1D Pos. description Pos. description Manual bead descent valve Viking oil plug Bead tank Manometer Pearls descent tube Product pressure setting knob Directional wheel lock/release manual block Oil level check glass Flow compensator www.larius.com ED.
  • Page 9 VIKING LINER PLUS 2K Fig. 2D Pos. description Pos. description Spotlight Spotlight control switch Product tank Product 2 and pearls releasing lever Pivoting wheel Pivoting wheel releasing lever Product 1 gun Product 1 and pearls releasing lever Product 2 gun www.larius.com ED.
  • Page 10 VIKING LINER PLUS 2K Fig. 3D Pos. description Pos. description Product 2 recirculation tube Releasing pearls guns Product 1 recirculation tube Product 1 filter Spotlight battery Product 1 tube connection from tank to pump Battery housing Product 1 filter Product 2 supply tube from pump to gun Product 2 tube connection from tank to pump Product 1 supply tube from pump to gun www.larius.com...
  • Page 11 VIKING LINER PLUS 2K Fig. 4D Pos. description Pos. description Air filter ON/OFF key and electric starting Fuel plug Oil tap 2 Fuel tank Starting air Pull-start ignition rope Petrol tap Oil tap 1 Accelerator lever Oil level warning light www.larius.com ED.

  • Page 12: Econtrols Description

    VIKING LINER PLUS 2K CONTROLS DESCRIPTION Fig. 1E Pos. description Pos. description Spotlight switch: turns on/off the front spotight Pull-start ignition rope: it allows manual ignition. Direction lever: Pulling the lever 3 to release the Power ON key: it's necessary for starting the internal linear drive lock and allow the machine to perform combustion engine by moving it clockwise;...

  • Page 13: Ftransport And Unpacking

    VIKING LINER PLUS 2K TRANSPORT AND UNPACKING • The packed parts should be handled as indicated in the symbols • Check the packing is undamaged on receipt of the equipment. and markings on the outside of the packing. Unpack the machine and verify if there has been any damage due to transportation.

  • Page 14: Hconditions Of Guarantee

    VIKING LINER PLUS 2K The high speed of travel of the product in the hose can create static electricity through discharges If the product to be used is toxic, avoid inhalation and sparks. It is suggested to earth the equipment. and contact by using protection gloves, goggles The pump is earthed through the earth cable of and proper face shields.
  • Page 15 VIKING LINER PLUS 2K Flexible tube connection from the pump to the flow compensator Connect the flexible tube of product 1 (I4) from pump connector (I5) to the tank 1 connector (I6) ensuring to tighten the fittings • (the use of two wrenches is suggested). Repeat the same operations for tubes of product 2. Fig.

  • Page 16: Jstarting The Combustion Engine

    VIKING LINER PLUS 2K Pearls descent tube connection from pearls tank to the guns • Connect the pearls descent tube (I10) from tank connection (I11) to the junction (I12) and to both gun 1 (I13) and gun 2 (I14) connections ensuring to tighten the fittings (the use of two wrenches is suggested). Fig.

  • Page 17: Kwashing The New Equipment

    VIKING LINER PLUS 2K WASHING THE NEW EQUIPMENT • The equipment has already been adjusted at our factory with light mineral oil left inside the pumping group as protection. Therefore, wash with thinner before sucking the product. • Fill the product tank with washing liquid. •...

  • Page 18: Lpreparation Of The Paint

    VIKING LINER PLUS 2K • Open the re-circulation valve (K7) and (K8). • Stop the internal combustion engine. • At this point the machine is ready. If water-based paints are to be used, after the washing with solvent, it is recommended to wash the tank again with soap and water, then rinse with clean water (repeating the previously described procedures).

  • Page 19: Ngun Assembling And Regulations

    VIKING LINER PLUS 2K Pos. description Drop tank Catadioptric material distributing valve Filling tubes from tank to guns Fig. 1M GUN ASSEMBLING AND REGULATIONS PRODUCT GUN ASSEMBLING • Assemble the gun (N1) on the gun holder arm 1 (N2) ensuring to tighten the handle (N3). Repeat the same operations for the gun Fig.
  • Page 20 VIKING LINER PLUS 2K REFERENCE ROD REGULATION • The reference rod can be moved up or down by acting on the handle (N4) or forward or backward through the handle (N5). Once placed in the desired position, the handles must be locked again. Fig.

  • Page 21: Ooperation

    VIKING LINER PLUS 2K GUN HOLDER ARM REGULATION • The gun 2 holder arm can be moved up or down using the handle (N11), forward or backward using the handle (N12) or inwards or outwards usign the handle (N13) and (N14). Once placed in the desired position, the handles must be locked again. The same instructions are valid aldo for gun 1 and the corresponding handles / knobs.

  • Page 22: Pcleaning At The End Of Work

    VIKING LINER PLUS 2K • Start the combustion engine following the indications provi- ADJUSTING THE INTERNAL COMBUSTION ENGINE SPEED ded in the chapter “STARTING COMBUSTION ENGINE”. • Gently move the motor acceleration lever (O6) to increase • Open the re-circulation valve (O3) and (O4). or decrease the speed of the pump.

  • Page 23: Qgeneral Maintenaince

    VIKING LINER PLUS 2K • Open the recirculation safety valve (P3) and (P4) to discharge • Make sure the solvent recycles from the recirculation tube. the pressure in the circuit. • Point the gun towards the product collection tank and, keeping the trigger pressed, discharge the remaining product till a clean solvent comes out.

  • Page 24: Rroutine Maintenaince

    VIKING LINER PLUS 2K ROUTINE MAINTENAINCE TOP UP HYDRAULIC OIL With each start up, check the hydraulic oil level by looking through the gauge on the side of the hydraulic body. If necessary, use to top up the level: AGIP DICREA 150 type hidraulic oil Max oil level REPLACING THE HYDRAULIC OIL Fig.

  • Page 25: Ttroubleshooting

    VIKING LINER PLUS 2K TROUBLESHOOTING Inconveniente Causa Soluzione Engine won't start The fuel manifold is closed; Switch the fuel manifold to "Open" position; Engine is out of gas; Refill gas tank; Cold engine; Switch the Start lever to MAx position; Spark plug cable is disconnected or damaged;...

  • Page 26: Spare Parts

    VIKING LINER PLUS 2K SPARE PARTS BEL TENSIONER TANKS SUPPORT Pag. 30 Pag. 31 COMPLETE PUMP MOTOR BODY Pag. 28 COMPLETE COLOR BODY Pag. 25 FLOW COMPENSATOR Pag. 31 COMPLETE HYDRAULIC BODY Pag. 26 www.larius.com ED. 03 - 01/2021 - Cod. 150161...

  • Page 27: Ucomplete Color Body

    VIKING LINER PLUS 2K COMPLETE COLOUR BODY ATTENTION: always indicate code and quantity of each requested detail. Fig. 1U Pos. Code description Pos. Code description 33015 Nipple 33000 Complete colour body 33012 1/4" copper washer 33001DX Right colour body casting 33013/3 O ring 33001 Left colour body casting...

  • Page 28: Vcomplete Hydraulic Body

    VIKING LINER PLUS 2K COMPLETE HYDRAULIC BODY Fig. 1V www.larius.com ED. 03 - 01/2021 - Cod. 150161...
  • Page 29 VIKING LINER PLUS 2K ATTENTION: always indicate code and quantity of each requested detail. Pos. Code description Pos. Code description 82005 Plug oil 18711 Hydraulic body 31128 Corteco 28x38x7 32018 Cylinder liner 9308 Screw M3x8 UNI 5931 32033 Piston insert 18716 3302/4 33003...

  • Page 30: Wcomplete Pump Motor Body

    VIKING LINER PLUS 2K COMPLETE PUMP MOTOR BODY ATTENTION: always indicate code and quantity of each requested detail. Fig. 1W www.larius.com ED. 03 - 01/2021 - Cod. 150161...
  • Page 31 VIKING LINER PLUS 2K Pos. Code description Q.ty Pos. Code description Q.ty 18192 Screw TE 3/8-24 95153 Washer Ø 9x36 33005 Washer schnor Ø 10 69107 Screw M10x80 18464 Spacers 95096 Washer Ø 10 18376 Cross 96080 Nut M10 18469 Carter 20560 Screw M10x60...

  • Page 32: Xbelt Tensioner Support

    VIKING LINER PLUS 2K BELT TENSIONER SUPPORT ATTENTION: always indicate code and quantity of each requested detail. Fig. 1X Pos. Code description Q.ty Pos. Code description Q.ty 81033 Washer Ø 10 81010 Nut M12 4087 Lower support 95066 Washer Grower 8389 Screw M12x80 4088...

  • Page 33: Yflow Compensator

    VIKING LINER PLUS 2K FLOW COMPENSATOR ATTENTION: always indicate code and quantity of each requested detail. Fig. 1Y Pos. Code description Q. ty 3372 Flow compensator 37180 Gasket 3283 Union 33010 Gasket TANKS ATTENTION: always indicate code and quantity of each requested detail. Fig.

  • Page 34: Aa Accessories

    VIKING LINER PLUS 2K ACCESSORIES Nozzles code SFC07-20 SFC17-40 SFC25-60 SFC33-60 SFC07-40 SFC17-60 SFC27-20 SFC33-80 SFC09-20 SFC19-20 SFC27-40 SFC39-40 SFC09-40 SFC19-40 SFC27-60 SFC39-60 SUPER FAST-CLEAN SFC11-20 SFC19-60 SFC27-80 SFC39-80 SFC11-40 SFC21-20 SFC29-20 SFC43-40 SFC13-20 SFC21-40 SFC29-40 SFC43-60 SFC13-40 SFC21-60 SFC29-60 SFC43-80 SFC13-60 SFC23-20...
  • Page 35 VIKING LINER PLUS 2K GUN EXtENSION art. description 30 cm 60 cm 100 cm COMPLEtE FaSt-CLEaN EXtENSION art. description 30 cm 60 cm 100 cm PLa 1/4'' + FaSt- CLEaN WItH NOZZLE art. description K11420 130 cm K11425 180 cm K11430 24 cm PLa 16X1,5 + FaSt-...

  • Page 36: Declaration Of Conformity

    VIKING LINER PLUS 2K CE dECLaRatION OF CONFORMItY Company LaRIUS srl Via Antonio Stoppani 21 - 23801 Calolziocorte (LC) ITALY tel: +39 0341 621152 Fax: +39 0341 621243 E-mail: larius@larius.com Declares under his owns resonsibility that the product: VIKING LINER PLUS airless professional road marking bicomponent version 2k 1:1 complies with the directives: - EC directive 2006/42 Machinery directive...
  • Page 37 LaRIUS srl Via Antonio Stoppani 21 - 23801 Calolziocorte (LC) ITALY TEL. +39 0341 621152 - Fax +39 0341 621243 - larius@larius.com www.larius.com...

Table of Contents