Pneumatic hoist twin mast for 200 litres
The operator must arrange a suitable environment before installing it as we show below:
•
An area wide enough to allow the loading and unloading drum and routine maintenance.
•
Make sure there is sufficient space in height to allow lifting and easy access to the air control groups.
•
For the air supply, use a hose with an internal diameter of not less than 10 mm.
•
Make sure that the air regulators (A) are closed. (Turn the adjusting knob clockwise to close it).
Fig. 2H
H1
Closed
Fig. 3H
•
Make sure the air pressure valve (H1) to the pressure plate
is closed.
www.larius.com
8
A
A
A
A
A
Closed
H2
Upwards
Stop
Downwards
Fig. 4H
•
Make sure the air hose to the air pump is attached to the
piston and the pump.
•
Make sure that the control lever (H2) is in the intermediate
position (Stop).
Closed
-
Closed
ED. 10 - 07/2020 - Cod. 150133