Disposal - Bosch Rexroth CS351 Operating Instructions Manual

86/96 Bosch Rexroth AG

Disposal

Proceed as follows to disassemble the Compact
System:
1. Switch off the power supply to the Compact
System and allow for a discharging time of at
least 90 seconds.
2. Remove the power supply connection cable.
3. Remove the handheld nutrunner/tightening
spindle:
4. Release and open the front cover.
5. Disconnect the motor OFF equipment and
external peripherals.
6. After you have removed the module, close
off the module slot with a dummy panel.
7. Close the front cover.
CS351/CC-CS351 | 3 609 929 B45/2019-12
12 Disposal
Environmental protection
Careless disposal of the Compact System could
lead to pollution of the environment.
Therefore, dispose of the device in accordance
with the currently applicable regulations in your
country.
Products
Products manufactured by us can be returned
free-of-charge for disposal. However, a
prerequisite for this is that there are no
objectionable films such as oil, grease or other
contamination on the device.
Further, the product may not contain any
improper foreign substances or foreign
components when it is returned.
Ship the product free to Rexroth Service; see
chapter "Service and Sales" on page 91.
These instructions have been printed on recycled
paper free of chlorine.
Packaging
Packaging materials consist of cardboard, wood,
and styrofoam. They can be easily recycled at any
point of acceptance. For ecological reasons,
please refrain from returning the empty
packaging to us.