Bosch Rexroth CS351 Operating Instructions Manual page 66

66/96 Bosch Rexroth AG
Product description
A slot interface (A)
This interface is intended for use of type A
interface modules from Rexroth.
NOTE
Damage due to improper assembly!
Damage to the connections
Carefully insert the modules, following

the assembly instructions in the
module operating instructions.
Only use interface modules from

Rexroth.
An overview of all available
interface modules can be found on
the Internet at
http://www.boschrexroth.com/
tightening
CS351/CC-CS351 | 3 609 929 B45/2019-12
B slot interfaces (B1, B2)
These interfaces are intended for use of type B
interface modules from Rexroth.
NOTE
Damage due to improper assembly!
Damage to the connections
Carefully insert the modules following

the assembly instructions in the
module operating instructions.
Only use interface modules from

Rexroth.
An overview of all available
interface modules can be found on
the Internet at
http://www.boschrexroth.com/
tightening
Slog B2 is not applicable in compact systems
with integrated computer unit. The computer
unit must be configured as interface module in
slot B2 on commissioning.
NOTE
Damage due to improper
disassembly/assembly!
Damage to the connections
The computer unit is an integral part of

the tightening system. It must not be
installed in or removed from the Compact
System subsequently like an interface
module.