Adding A Device To The Project; Adding Ir-Controlled Devices To The Project - AMX AXT-CA10 Instruction Manual

Using the DXP-PRO Wizard

Adding a Device to the Project

To add a device to your system, click the Add button in the System Information dialog. This opens
the Device Configuration dialog - Device Data tab.
In the Device Data tab:
1. Select the type of equipment you are adding from the Source Type drop-down list.
2. Enter a name for the device in the Display Name field. This is the name for the device that will
appear on the touch panel.
3. If the device is a Compact Disc Player or Digital Video Disc player, specify the size of the disc
changer (if applicable; by default this field is set to 1).
4. Use the radio buttons to select the Control Method associated with the new device (IR,
Serial, IP, or AXlink).
The control methods available for selection depend on the device type specified.
For example, if you select DVD Player, the only available control method options are
IR and Serial (the remaining radio buttons are disabled).
If IR is selected, you must locate the associated IRL file by using the Browse button
from the IR Data section. If you are using Serial as a Control Method, choose the
device from the Control Logic drop-down list.

Adding IR-Controlled Devices to the Project

To add a device to your system, click the Add button in the System Information dialog. This opens
the Device Configuration dialog - Device Data tab.
In the Device Data tab:
1. Select the type of equipment you are adding from the Source Type drop-down list.
2. Enter a name for the device in the Display Name field. This is the name for the device that will
appear on the touch panel.
3. If the device is a Compact Disc Player or Digital Video Disc player, specify the size of the disc
changer (if applicable; by default this field is set to 1).
4. Use the radio buttons to select IR as the Control Method associated with the new device.
The control methods available for selection depend on the device type specified.
For example, if you select a Digital Satellite System, the only control method option is
IR (the remaining radio buttons are disabled).
5. Associate an IR code file (*IRL) to the new device (IR-controlled devices only):
6. Once an IR file has been selected, note that the Manufacturer, Hand Control Model #, Device
Model # and Info fields are automatically updated to show any property-level file information
that was associated with the selected IR file when it was created.
24
Click the Browse button to locate and select the appropriate IR file via the Select IR File
dialog.
Click the Search button (binoculars) to search for the appropriate IR file, via the Search
for IR File dialog.
DXP-PRO v1.1 - Programmer's Guide