Integrated Applications Dialog - AMX AXT-CA10 Instruction Manual

Using the DXP-PRO Wizard
Once you have made your selections, click Back or Next to close this dialog.
Note that you can't disable the System Information dialog.

Integrated Applications Dialog

The Integrated Applications dialog (FIG. 9) allows you to configure i!-TimeManager and/or
Resource Manager functionality.
Before being able to use the features available on this page, the Resource Manager
Suite (RMS) should already be installed. If the Software Development Kit (SDK) has
not been properly installed, all selectable fields within this dialog are greyed-out and a
message will appear at the top of the dialog stating, "SDK not installed".
The RMS SDK requires that the latest version of the following applications be loaded
prior to installation: NetLinx Studio 2, TPDesign4, and TPDesign3.
The Resource Manager section allows you to enter the information corresponding to the target
RMS server and associated NXA-UPS device. All queriable devices within the target environment
such as: source/display/switching devices and NetLinx devices (touch panels and NXA-UPSs) can
be monitored via the MeetingManager application only.
No scheduling capabilities are available through the DXP-PRO touch panels and must be done
through the actual RMS (Resource Manager Suite) application interface.
To enable online/offline notification, the programmer would need to write custom Resource
Manager NetLinx code within the DXP-PRO project file that is downloaded to the target Master.
The RMS application provides a Welcome touch panel page that can be enabled from within the
Touch Panel Interfaces dialog page via the Resource Manager Welcome Panel radio button being
enabled for a selected panel.
42
Switcher Inputs/Outputs (page 52)
Channel Preset Categories (page 55)
Channel Presets (page 56)
CD Titles (page 57)
DVD Titles (page 59)
Relay Control (page 59)
Navigation and Routing Macros (page 61)
System Macros (page 65)
The Use Resource Manager option provides the ability to enable touch panel pages to
support the on-screen display of room schedules and appointments associated with the
target RMS server. If this option is selected, navigate to the Touch Panel Interface dialog
page and identify whether a selected panel is used for control or as an RMS Welcome
panel. No RMS support is included in G3 panels, except for the use of Welcome Panels.
The Server Host Name or IP Address is the IP information or resolvable host name for
the target RMS server. The following characters are not supported within this field:
` ~ ! @ # $ ^ & * () = + [ ] {} \ | ; : '" < > / ? and space are not allowed characters.
DXP-PRO v1.1 - Programmer's Guide