AMX AXT-CA10 Instruction Manual page 28

Introduction
When creating a new project it is important to go through each dialog in order, using the Next>>
button. This helps to insure that no information is missed and that the project configuration is
complete. Later, when editing the project, the Jump to list allows quicker and easier access to
specific dialogs.
When you create a new project, the Wizard dialogs become available as selections in
the Jump To list only after they have been populated with the required data. In this
case of the sample project, all Wizard dialogs are available since the project is
complete.
To Create a New Project:
1. Click on the Create New Project command button. This launches the Design XPress -
Professional Project Wizard, which steps you through the process of designing and configuring
a control system. Refer to the Launching the DXP-PRO Project Wizard section on page 20 for
more information.
18 DXP-PRO v1.1 - Programmer's Guide