Using The Macro Steps For - AMX AXT-CA10 Instruction Manual

FIG. 22 Adding a Macro to a Project
To see a good example of how a typical macro is structured, open the macro
included in the sample project (select the "Projector" macro from the Macros list, and
click the Edit command button).
Using the Macro Steps for....dialog to edit the macro steps
Select a macro and click the Edit button in the Macros section of the Navigation and Routing
Macros dialog to open the Macro Steps dialog (FIG. 23). Use the Macro Steps dialog to build the
macro by specifying each step according to the functional requirements of the macro. A macro can
contain up to 50 steps.
FIG. 23 Macro Steps dialog
DXP-PRO v1.1 - Programmer's Guide
Using the DXP-PRO Wizard
New tab
available in
version 1.1
63