Before You Begin; Configuring Your Program Preferences - AMX AXT-CA10 Instruction Manual

Introduction

Before You Begin

The first step in defining the system is to run the Design XPress - Professional (DXP-PRO)
application. This Windows
site. With this wizard you define the locations of all equipment, the number of user interface
devices, lighting scenes, source equipment, etc.
There is one important note related to the use of lighting addresses. Lighting addresses consist of
both a keypad address and button. The keypad address is the address of the keypad for the lighting
system being used and must be represented in the format for that lighting system. The formats for
the supported lighting systems are listed below:
Lighting Address Formats
Lighting Controller
AMX ALD-D48 Lighting System
AMX Radia
Clipsal C-Bus
Dynalite
Lehigh DX2
Lutron GRAFIK Eye
Lutron Homeworks Interactive
Lutron RadioRA
LiteTouch 5000
Tridonic DALI
Vantage Qlink
Once the application entries are completed, the touch panel files, source code, NetLinx Studio
project file, text files (CD titles, etc.), and report file are all created.

Configuring your Program Preferences

Select Edit > Preferences to open the Preferences dialog, where you can specifically set various
user preferences for DXP-PRO. The options in this dialog include:
16
®
based wizard should be run in the office well in advance of going on-
Address Format
N/A
AXlink Device ID (1-255)
Group Address:Network Address (using a
hexadecimal value and a local network
address)
DynaLite area
Lehigh area (valid range 1 - 16)
Master
Processor:Link:Keypad
Keypad Address
Note: Keypad address 12 is reserved as
the Serial RadioRA interface. This
interface is a virtual keypad, and does not
contain any buttons.
Keypad Address
(3-digit hexadecimal value)
Tridonic group address
(valid range is 0 - 15)
Master:Keypad
Show Splash Screen on Startup: A toggling option to show the DXP-PRO splash screen
when the program is started. If this item is not checked the splash screen can be viewed
by selecting Help > About.
Warning on duplicate Channel Preset Names and Channels: Alerts you to the creation
of duplicate channel preset names and channels. All Channel Preset names and channels
must be unique.
DXP-PRO Example
1 (greyed-out)
96
C1:00
18
1
17
1:4:9
12
1AD
0
1:5
DXP-PRO v1.1 - Programmer's Guide