Table of Contents
Advertisement
Basics and mounting
Mounting 8x periphery modules
Coding
18
There is the possibility to fix the assignment of electronic and terminal module. Here VIPA
coding pins (order number 000-0AC00) can be used. The coding pin consists of a coding
jack and a coding plug. By combining electronic and terminal module with coding pin, the
coding jack remains in the electronic module and the coding plug in the terminal module.
This ensures that after replacing the electronics module just another electronic module
can be plugged with the same encoding.
Each electronic module has on its back 2 coding sockets for coding jacks. Due to the
characteristics, with the coding jack 6 different positions can be plugged, each. Thus
there are 36 possible combinations for coding with the use of both coding sockets.
1.
Plug, according to your coding, 2 coding jacks in the coding sockets of your elec-
tronic module until they lock
2.
Now plug the according coding plugs into the coding jacks.
3.
To fix the coding put both the electronic and terminal module together until they lock
CAUTION!
Please consider that when replacing an already coded electronic module,
this is always be replaced by an electronic module with the same coding.
Even with an existing coding on the terminal module, you can plug an
electronic module without coding. The user is responsible for the correct
usage of the coding pins. YASKAWA assumes no liability for incorrectly
attached electronic modules or for damages which arise due to incorrect
coding!
VIPA System SLIO
HB300 | FM | 050-1BB30 | en | 20-40
Advertisement
Table of Contents
