Connection To Wheel Loader - probst JUMBO-BV-VARIO Manual

Installation
JUMBO-BV-VARIO-B
V2
5.3

Connection to wheel loader

Fig. 1
●
Device must stand on plane
ground.
Fig. 4
●
Drive with wheel loader on block.
Check all screw-connections after several working hours and if necessary retighten!
Fig.2
●
Attach the correct size of paws
(below – see arrows)
Fig. 5
●
Attach the correct size of paws
(above)
.
●
Attach the lifting plate of the
wheel loader (on lower paws)
.
●
Tighten all screws on all 4 paws
26/07/16
20 / 40
Fig.3
Fig.6