Function Control; Unauthorized Transportations; Unauthorized Alterations - probst JUMBO-BV-VARIO Manual

Safety
JUMBO-BV-VARIO-B
V2

4.13 Function Control

●
Before using the device check the functions and the
working condition.
●
Maintenance and lubrication are only permitted
when device is shut down!
●
Do not use the device, until all faults which can
cause safety hazards are removed.

4.14 Unauthorized transportations

Prohibition

Transportation of people and animals.

Transportation of other loads and material than described in this manual.

4.15 Unauthorized alterations

All unauthorized alterations of the device and the use of any self-made additional equipment
could cause danger and are therefore forbidden!!
Prohibition
Correct any faults before using the device. If faults occur during operation, switch
the device off and correct the faults before continuing work with the device.
All unauthorized transportations with the device are not allowed!

If there are any cracks, splits or damaged parts on
any parts of the device, immediately stop using it.
●
The operating instructions must be available at the
workplace every time.
●
Do not remove the data-plates of the machine.
●
Unrecognisable data-plates must be replaced.
26/07/16
16 / 40