Configuring Port Connection Setting - Port Menu [Line] - Moxa Technologies CN2510 Series User Manual

Setting up Windows Real COM/Linux Real TTY/Unix Fixed TTY
Configuring Port Connection Setting – Port Menu [Line]
1. In MAIN MENU, use the arrow keys to select Port, and then press Enter.
2. In PORT MENU, select Mode, and then press Enter.
3. Select the ports and configure the settings.
Setting
Speed
Bits
Stop
Parity
FIFO
RTS/CTS
XON/XOFF
Discon. ctrl
4. Repeat the step above to configure all functions.
5. Press ESC to return the Port Menu.
Value
50 bps to 230.4 Kbps
5/6/7/8
1/2
None, Even, Odd, Mark, Space Parity Check
Yes/No
Yes/No
Yes/No
None/DSR off/DCD off
Notes
Baud rate
Data bits
Stop bits
FIFO setting
Hardware Flow Control
Software Flow Control
Disconnection condition when DSR or
DCD signal is off
CN2510 User's Manual 4-5