Configuring The Cn2610-The Server Menu; Server Configuration-Info - Moxa Technologies CN2610 User Manual

CN2610 User's Manual
Configuring the CN2610—The Server Menu
In this section, we describe both basic and advanced configuration tasks. We use the Telnet
interface to illustrate (the Serial Console interface is the same).
Server Configuration—Info.
1. From the MAIN MENU, use the arrow keys to select Server, and then press Enter.
CN2610-8
------------------------------------------------------------------------------
[Server]
Examine/modify async server node/table configuration
Enter: select
2. From the SERVER MENU, select Info., and then press Enter.
CN2610-8
------------------------------------------------------------------------------
[Info.]
Examine/modify async server basic configuration
Enter: select
3. The Info. page contains input/display fields for name, location, serial number, Domain
server 1/2 IP address, WINS function disable, WINS server IP address, and Console
password. Each item is described in detail below.
CN2610-8
------------------------------------------------------------------------------
[Info.]
Examine/modify async server basic configuration
ESC: back to menu
Async server name
Async server location
Async server serial number [3]
Domain server 1 IP address [192.168.1.16
Domain server 2 IP address [
WINS function disable
WINS server IP address
Console password
Async server name—The CN2610 uses this name to identify itself when requested by an
SNMP station or UNIX host. Use an ASCII string with maximum length of 40 characters for
the name. Spaces are allowed.
Async server location—The CN2610 reports this location to the SNMP station when
requested. Use an ASCII string with maximum length of 44 characters for the location. Spaces
are allowed.
Async server serial number—Each CN2610 Async Server is assigned a unique serial
number before it leaves the factory. The serial number cannot be changed.
Domain server 1/2 IP address—A Domain Name Server is a network host that translates
host names to IP addresses. Hosts use the Domain Name Server to request the IP address that
corresponds to a particular url (such as www.moxa.com). Input the IP address of the primary
Domain Name Server in the Domain server 1 IP address field, and the IP address of the
Port seTting sAve Utility Restart Exit
ESC: previous menu
Lan Adv. Host_table Route_table User_table Quit
ESC: previous menu
Lan Adv. Host_table Route_table User_table Quit
Enter: select
CN2610-8_19 V2.0
CN2610-8_19 V2.0
CN2610-8_19 V2.0
[CN2610-8_19
[
]
[no ]
[
[
2-13
Getting Started
MAIN MENU
SERVER MENU
]
]
]
]
]