Moxa Technologies CN2510 Series Quick Installation Manual
Hide thumbs
Also See for CN2510 Series:
- Quick installation manual (2 pages) ,
- User manual (236 pages) ,
- Quick installation manual (2 pages)
Advertisement
Quick Links
Quick Installation Guide
Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax:
+49-89-3 70 03 99-99
Moxa India:
Tel:
+91-80-4172-9088
Fax:
+91-80-4132-1045
CN2510 Series
Edition 7.1, November 2018
Technical Support Contact Information
www.moxa.com/support
2018 Moxa Inc. All rights reserved.
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax:
+86-21-5258-5505
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax:
+886-2-8919-1231
P/N: 1802025001012
*1802025001012*
Advertisement
Related Manuals for Moxa Technologies CN2510 Series
Summary of Contents for Moxa Technologies CN2510 Series
- Page 1 CN2510 Series Quick Installation Guide Edition 7.1, November 2018 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0...
-
Page 2: Package Checklist
Overview Welcome to the Moxa CN2510 Async Server, a communication server with 8/16 asynchronous RS-232 ports and 1 10/100 Mbps Ethernet LAN port. The CN2510 Async Server can be used to connect terminals, modems, printers, and other asynchronous serial devices to LAN hosts. The CN2510 complies with TCP/IP and IEEE 802.3 specifications using standard Ethernet 10/100BaseT and twisted pair 10/100BaseTX cable as the physical medium. - Page 3 Rear Panel Connector Function AC Power Input Automatic detection of 100-240V, 47-63 Hz AC power supply (CN2510-8 and CN2510-16). Automatic detection of ±48 VDC (38 to 72 VDC, -38 to -72 VDC) power supply (CN2510- 8-48V and CN2510-16-48V) Power On/Off Switch I indicates power on, O indicates power off RS-232 Console Port...
-
Page 4: Hardware Installation
Hardware Installation 1. Installing the CN2510 Place the CN2510 on a desktop, or attach it to a standard rack cabinet. 2. Wiring Requirements Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross, make sure the wires are perpendicular at the intersection point. -
Page 5: Software Installation
connected, the CN2510 will indicate a valid connection to the Ethernet in the following ways: The top right corner LED indicator maintains a solid green color when the cable is properly connected to a 100 Mbps Ethernet network. The top left corner LED indicator maintains a solid orange color when the cable is properly connected to a 10 Mbps Ethernet network. -
Page 6: Pin Assignments And Cable Wiring
Pin Assignments and Cable Wiring 10/100BaseTX Port Pinouts Async RS-232 Port and Console Port Pinouts 10/100BaseTX Cable Wiring NOTE The following cables are optional accessories. CBL-RJ45M9-150 CBL-RJ45F9-150 CBL-RJ45M25-150 CBL-RJ45F25-150 DB9 and DB25 connector pinouts: The following figures illustrate standard connector pinouts. However, pinouts for serial devices differ from manufacturer to manufacturer. -
Page 7: Environmental Specifications
Refer to the serial device’s user’s manual for the exact pinouts of your device. DB9 Male Connector DB9 Female Connector DB25 Male Connector DB25 Female Connector Environmental Specifications Power requirements Power Input 100 to 240 VAC, 47 to 63 Hz, or ±48 VDC Power Consumption CN2510-8/16 125 mA @ 110 VAC...