Bluetooth® Functions And Application (App); Error Messages/Troubleshooting - Microlife BP W70 BT User Manual

BP3KN1-3B
®
8. Bluetooth functions and application (App)
This device can be used in conjunction with a smartphone running the «Microlife Connected
Health+» App. The Bluetooth
been completed.
Please download the "Microlife Connected Health+" App from Apple's App Store
®
Google Play before pairing your devices.
If you have any issues with your setup, please contact customer service toll free:
1-800-568-4147 for additional support.
Activating your Bluetooth
®
The Bluetooth icon indicator on your blood pressure monitor, located in the upper right
portion of the screen, is designed to provide information about the connection between your
device and the monitor. Please note the following:
®
• The Bluetooth icon on your blood pressure monitor will flash initially when ready to
connect with a device, and continue flashing for 2 minutes until a connection occurs.
• To manually activate the Bluetooth
approximately 4 seconds or until the Bluetooth
• If a connection does not occur within 2 minutes, the Bluetooth
automatically turn off.
• Note: At least one blood pressure reading must be taken and recorded on the monitor
before the data can be transferred
Pairing your device:
• Download the App to your phone.
• Create User Profile on App.
• Confirm phone's Bluetooth
• Open the App on your phone.
• Select "Dashboard" from the App's home screen.
• Press and hold the POWER/START button on the monitor for approx. 4 seconds or until
®
the Bluetooth icon starts blinking.
• On the App press the "sync" button located on the "Dashboard" screen.
• Data in monitor should successfully transfer over to the App on your phone.
For more detailed information visit www.microlife.com/technologies/connect.

9. Error messages/troubleshooting

If an error occurs during the measurement, the measurement is interrupted and an error
message, e.g. «ERR 3», is displayed.
IB BP3KN1-3B V4920 EN
®
connection is automatically active after the measurement has
®
®
on your monitor, press and hold the power button for
®
is turned on.
®
icon starts blinking.
®
function on the monitor will
EN
®
or
17