Installing The Cpu - Nexcom NDiS B533 User Manual

Chapter 3: System Setup

Installing the CPU

1. Loosen the mounting screws that secure the heat sink to the chassis.
▪ Make sure all power cables are unplugged before you install
the CPU.
CAUTION! CAUTION! CAUTION!
▪ The CPU socket must not come in contact with anything
other than the CPU. Avoid unnecessary exposure.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
2. Now remove the heat sink to access the CPU socket, and remove the
protective film on the thermal pad. Make sure this film is removed
before reinstalling the heat sink. The thermal pad can only be used once
and cannot be used repeatedly.
3. The CPU socket is readily accessible after you have removed the heatsink.
Mounting
Screw
25
Protective
film
Thermal
pad
Bottom Side of the Heat Sink
NDiS B533 User Manual
CPU socket