Nexcom NDiS B533 User Manual page 58

Chapter 4: BIOS Setup
Power Configuration
This section is used to configure power state settings.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security
Restore AC Power Loss [Power Off]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Restore on AC Power Loss
Power Off When power returns after an AC power failure, the
system's power is off. You must press the Power button
to power-on the system.
Power On When power returns after an AC power failure, the system
will automatically power-on.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Select AC power state when
power is re-applied after a power
failure.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
BIOS Security Configuration
This section is used to configure BIOS security.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot
BIOS Security Configuration
BIOS Lock
RTC RAM Lock
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Lock
Enables or disables BIOS lock enable (BLE) bit.
RTC RAM Lock
Enables or disables RTC RAM lock.
44
Security Save & Exit
Enable or disable BIOS lock
enable (BLE) bit.
[Disabled]
[Disabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS B533 User Manual