Step 1 - Verify Package Contents - Wayne WAPC250 Operating Instructions And Parts Manual

OPEARTING INSTRCUTIONS AND PARTS MANUAL

STEP 1 - VERIFY PACKAGE CONTENTS

(1) POOL COVER PUMP
(1) CHECK VALVE/
(1) 25' ROPE
(1) PUMP STRAINER
STEP 2 - INSTALL CHECK VALVE
INSTALL CHECK VALVE
SO ARROWS ARE
POINTING UPWARD
STEP 3 - ATTACH STRAINER
ROTATE PUMP
DOWN TO LOCK
STEP 4 - CONNECT GARDEN HOSE
HOSE ADAPTER
TOP
CLICK
LISTEN FOR PUMP TO
"CLICK" IN PLACE
STEP 5 - SECURE ROPE TO STRAINER
STEP 6 - POSITION ON POOL COVER
STEP 7 - PLUG INTO GFCI OUTLET
FOR FURTHER PLACEMENT TECHNIQUES AND DETAILED INSTALLATION FOR
INGROUND AND ABOVE GROUND POOL APPLICATIONS, REFER TO PAGES 5
and 7- FIGURES (A-E).
The most common cause for the pump not removing water can be
resolved by following step 6 of the troubleshooting section. (Page 9)
FEED ROPE THROUGH
LOOP ON STRAINER AND
SECURE WITH KNOT
5